wheels and 7.5 5 lug disk rear TC interior March 31, 2012, 12:49:54 AM Have some stuff I would like to sell. I could use the room and cash more than this stuff laying around. Not looking to give anything away or get rich on any of this stuff. If my prices are off let me know, willing to deal and work something out. Could use an electric cooling fan, fox body subframes and stamped rear upper control arms. Pony wheels, as you can see in the pic the finish is kinda py but they are clean and rash free. Perfect for a respray. Tires are shot and some don't hold air but I think 100 is fair. http://good-times.webshots.com/photo/2128656120096549235OEIkOVhttp://good-times.webshots.com/photo/2802917920096549235ZXzFYfI have the original 7.5 rear end from my 84 SVO, its a 5 lug 345 geared rear with disk brakes. I have 2 sets of calipers, the caliper brackets and all the hardware but missing the rotors. Will start out at 200 for the complete set up with the brakes.Bullet wheels, decent but most of them have some curb damage. I'll start at 100?http://good-times.webshots.com/photo/2657194580096549235JgkFNChttp://good-times.webshots.com/photo/2996400100096549235QRdITcI have close to an entire 87 Turbo-coupe interior. Starting with the seats, they are both power bases, I have the harness and switches and plate too that can go with the seats. Seats are in great shape for how old they are, some sun fading and wear but they are clean decent seats. Lets start at 200 for the front and rear seats? http://good-times.webshots.com/photo/2354647030096549235jAVFOZhttp://good-times.webshots.com/photo/2222445930096549235rsgloFhttp://good-times.webshots.com/photo/2995328190096549235JQGQvAhttp://good-times.webshots.com/photo/2707354440096549235SlWxIJI also have the door glass and the quarter windows, center console minus the shifter bezel, gauge surrounds and complete door panels with arm rests and all that other fun stuff. http://good-times.webshots.com/photo/2899025350096549235ywZlrLhttp://good-times.webshots.com/photo/2704269270096549235NWYJEkhttp://good-times.webshots.com/photo/2845592900096549235qRwREHhttp://good-times.webshots.com/photo/2016043410096549235kxGwMlhttp://good-times.webshots.com/photo/2493414460096549235DYWIDVI have a 4cyl t5 out of the same TC, 4K miles on rebuild, engine suffered terminal damage and parted the car out. Paid 1,200 for rebuild, input shaft was replaced as well as third gear and I think second was replaced too. If I can find the receipt I can confirm. Start out at 500 on the transmission. 80MM MAF part # F3VF-12B579-AA AFH80-01, From a 93-96 mark VIII. I never ran it up purchased it for a set up that I never ran, I decided to go Megasquirt instead. 50 TPS harness that connects to the stock fox body and later 60MM throttle bodies and the TPS. Forced4.com sold them but are closed so I'm trying to stay fair at 30. Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #1 – April 08, 2012, 10:41:29 PM How wide are the bullet wheels? Also what would you want for the center console lid? Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #2 – April 13, 2012, 01:08:04 AM Center console lid id say 30 plus the ride, the wheels are the 05+ wheels that don't fit the fox body as well. Wheels should be 17X8 if I am not mistaken Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #3 – April 13, 2012, 01:36:24 PM PM sent Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #4 – April 13, 2012, 09:23:25 PM how much for the complete door panels? arm rests, console lid, speaker grilles the whole 9 yards? shipped to 46818?Edit: I noticed you do have near an entire interior...lol.what do you want for all the plastic peices. sail panels, rear trim a pillars, ect im going from smoke grey interior to raven/grey Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #5 – April 14, 2012, 12:37:45 AM blackjack, let me see what shipping is going to be and how I can get it all packaged. Wont be too cheap to ship but I'll see what were looking at for shipping, are you looking for the dash trim too? Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #6 – April 15, 2012, 10:52:25 PM Do the rims not fit due to the fact that they are 5 lug, or is the backspacing wrong for the car? I a planning on a 5 lug conversion. Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #7 – April 16, 2012, 12:32:52 AM edgar the pony wheels were a good fit on the SVO on stock suspension. The Bullet wheels I think are sold. Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #8 – April 16, 2012, 07:43:25 PM Roger. I will keep looking then. Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #9 – April 18, 2012, 06:09:31 PM Are the door pulls and trim pieces in good shape? Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #10 – April 23, 2012, 10:27:58 PM Are the plastic sleeves for the seat belts, the ones near the base of the doors in good shape? For sale?Thanks...David Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #11 – April 23, 2012, 11:14:43 PM Door pulls are a no go, cant find them. The seat-belts are one thing I didn't think to keep so I do not have the plastic sleeves for the seat belts. Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #12 – May 05, 2012, 07:20:40 PM If anybody remembers ATR, I have an ATR tailpipe...50 plus the ride http://good-times.webshots.com/photo/2083980630096549235tgTkTd Hydro clutch set up....65 plus the ride http://good-times.webshots.com/photo/2452208970096549235cpLzpY I have 2 sets of sway-bar endlink bushings. One is missing a washer. 10 plus shipping.http://good-times.webshots.com/photo/2389955890096549235TqSkkqMagnaflow 94109 3" in and out universal cat, new, unused 45+ shipping.http://good-times.webshots.com/photo/2438056320096549235qTiaYsAlso have reproduction plastic "turbo" turbocoupe keys...27 shippedhttp://good-times.webshots.com/photo/2626398980096549235VwQLah Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #13 – June 17, 2012, 02:10:12 AM Have some stuff I would like to sell. I could use the room and cash more than this stuff laying around. Not looking to give anything away or get rich on any of this stuff. If my prices are off let me know, willing to deal and work something out. Could use an electric cooling fan, fox body subframes and stamped rear upper control arms. Pony wheels, as you can see in the pic the finish is kinda py but they are clean and rash free. Perfect for a respray. Tires are shot and some don't hold air but I think 100 is fair. http://good-times.webshots.com/photo/2802917920096549235ZXzFYfhttp://good-times.webshots.com/photo/2128656120096549235OEIkOVI have the original 7.5 rear end from my 84 SVO, its a 5 lug 345 geared rear with disk brakes. I have 2 sets of calipers, the caliper brackets and all the hardware but missing the rotors. Will start out at 200 for the complete set up with the brakes.I have close to an entire 87 Turbo-coupe interior. Starting with the seats, they are both power bases, I have the harness and switches and plate too that can go with the seats. Seats are in great shape for how old they are, some sun fading and wear but they are clean decent seats. 200 for the front and rear seats? http://good-times.webshots.com/photo/2354647030096549235jAVFOZhttp://good-times.webshots.com/photo/2222445930096549235rsgloFhttp://good-times.webshots.com/photo/2995328190096549235JQGQvAhttp://good-times.webshots.com/photo/2707354440096549235SlWxIJI also have the door glass and the quarter windows, center console minus the shifter bezel, gauge surrounds and complete door panels with arm rests and all that other fun stuff. http://good-times.webshots.com/photo/2704269270096549235NWYJEkhttp://good-times.webshots.com/photo/2899025350096549235ywZlrLhttp://good-times.webshots.com/photo/2845592900096549235qRwREHI have a 4cyl t5 out of the same TC, 4K miles on rebuild, engine suffered terminal damage and parted the car out. Paid 1,200 for rebuild, input shaft was replaced as well as third gear and I think second was replaced too. If I can find the receipt I can confirm. Start out at 500 on the transmission. 80MM MAF part # F3VF-12B579-AA AFH80-01, From a 93-96 mark VIII. I never ran it up purchased it for a set up that I never ran, I decided to go Megasquirt instead. 50 TPS harness that connects to the stock fox body and later 60MM throttle bodies and the TPS. Forced4.com sold them but are closed so I'm trying to stay fair at 30.2 sets of Turbo Coupe key blanks. They are not NOS hard rubber; they are plastic reproductions.http://good-times.webshots.com/photo/2065531750096549235bdkPvN27 shipped a pair.If anybody remembers ATR, I have an ATR tailpipe...50 plus the ridehttp://good-times.webshots.com/photo/2083980630096549235tgTkTd Hydro clutch set up....65 plus the ridehttp://good-times.webshots.com/photo/2452208970096549235cpLzpY I have 2 sets of sway-bar endlink bushings. One is missing a washer. 10 plus shipping.http://good-times.webshots.com/photo/2389955890096549235TqSkkqMagnaflow 94109 3" in and out universal cat, new, unused 45+ shipping.http://good-times.webshots.com/photo/2438056320096549235qTiaYsTC intercooler in good shape 30 plus shipping http://good-times.webshots.com/photo/2582879830096549235ESAFAUI have one modified with a 1" bung fiber glassed on, worked perfect for years. no leaks. 100 plus shipping http://good-times.webshots.com/photo/2461313880096549235wJLIbwhttp://good-times.webshots.com/photo/2494473830096549235owGOlLT3 turbo, earlier style outlet on the cold side, .63 hot side. Purchased used as a working unit, seems good not a lot of shaft play but I wouldn't personally run with out a rebuild. 75+ shipping. TC Valve cover, good shape but needs a good paint job. 35 + shipping. EFI valve cover, nice shape, been sandblasted, primed and then started to paint black. Wound up getting a powdercoated one off evilbay so this one I stopped in the middle of. Just needs a couple coats of black. 75 + shippinghttp://good-times.webshots.com/photo/2990979950096549235BYAPenMSD 6AL, 2 step, and the proper tach adapter 250 shipped http://good-times.webshots.com/photo/2797575500096549235upvJoxI have an MSD 6 box that was handed to me, should work but it is untested. Take a gamble on it for 30? plus shippingSVO intercooler 30 + shipping. 87-88 style shorter intakes 50 + shipping. http://good-times.webshots.com/photo/2662023970096549235CplQziMotivated to make some room and money. Quote Selected
wheels and 7.5 5 lug disk rear TC interior Reply #14 – June 17, 2012, 11:25:02 AM Updated list with plenty of stuff addedHave some stuff I would like to sell. I could use the room and cash more than this stuff laying around. Not looking to give anything away or get rich on any of this stuff. If my prices are off let me know, willing to deal and work something out. Could use an electric cooling fan, fox body subframes and stamped rear upper control arms. Pony wheels, as you can see in the pic the finish is kinda py but they are clean and rash free. Perfect for a respray. Tires are shot and some don't hold air but I think 100 is fair. http://good-times.webshots.com/photo/2802917920096549235ZXzFYfhttp://good-times.webshots.com/photo/2128656120096549235OEIkOVI have the original 7.5 rear end from my 84 SVO, its a 5 lug 345 geared rear with disk brakes. I have 2 sets of calipers, the caliper brackets and all the hardware but missing the rotors. Will start out at 200 for the complete set up with the brakes.I have close to an entire 87 Turbo-coupe interior. Starting with the seats, they are both power bases, I have the harness and switches and plate too that can go with the seats. Seats are in great shape for how old they are, some sun fading and wear but they are clean decent seats. 200 for the front and rear seats? http://good-times.webshots.com/photo/2354647030096549235jAVFOZhttp://good-times.webshots.com/photo/2222445930096549235rsgloFhttp://good-times.webshots.com/photo/2995328190096549235JQGQvAhttp://good-times.webshots.com/photo/2707354440096549235SlWxIJI also have the door glass and the quarter windows, center console minus the shifter bezel, gauge surrounds and complete door panels with arm rests and all that other fun stuff. http://good-times.webshots.com/photo/2704269270096549235NWYJEkhttp://good-times.webshots.com/photo/2899025350096549235ywZlrLhttp://good-times.webshots.com/photo/2845592900096549235qRwREHI have a 4cyl t5 out of the same TC, 4K miles on rebuild, engine suffered terminal damage and parted the car out. Paid 1,200 for rebuild, input shaft was replaced as well as third gear and I think second was replaced too. If I can find the receipt I can confirm. Start out at 500 on the transmission. 80MM MAF part # F3VF-12B579-AA AFH80-01, From a 93-96 mark VIII. I never ran it up purchased it for a set up that I never ran, I decided to go Megasquirt instead. 50 TPS harness that connects to the stock fox body and later 60MM throttle bodies and the TPS. Forced4.com sold them but are closed so I'm trying to stay fair at 30.2 sets of Turbo Coupe key blanks. They are not NOS hard rubber; they are plastic reproductions.http://good-times.webshots.com/photo/2065531750096549235bdkPvN27 shipped a pair.If anybody remembers ATR, I have an ATR tailpipe...50 plus the ridehttp://good-times.webshots.com/photo/2083980630096549235tgTkTd Hydro clutch set up....65 plus the ridehttp://good-times.webshots.com/photo/2452208970096549235cpLzpY I have 2 sets of sway-bar endlink bushings. One is missing a washer. 10 plus shipping.http://good-times.webshots.com/photo/2389955890096549235TqSkkqMagnaflow 94109 3" in and out universal cat, new, unused 45+ shipping.http://good-times.webshots.com/photo/2438056320096549235qTiaYsTC intercooler in good shape 30 plus shipping http://good-times.webshots.com/photo/2582879830096549235ESAFAUI have one modified with a 1" bung fiber glassed on, worked perfect for years. no leaks. 100 plus shipping http://good-times.webshots.com/photo/2461313880096549235wJLIbwhttp://good-times.webshots.com/photo/2494473830096549235owGOlLT3 turbo, earlier style outlet on the cold side, .63 hot side. Purchased used as a working unit, seems good not a lot of shaft play but I wouldn't personally run with out a rebuild. 75+ shipping. TC Valve cover, good shape but needs a good paint job. 35 + shipping. EFI valve cover, nice shape, been sandblasted, primed and then started to paint black. Wound up getting a powdercoated one off evilbay so this one I stopped in the middle of. Just needs a couple coats of black. 75 + shippinghttp://good-times.webshots.com/photo/2990979950096549235BYAPenMSD 6AL, 2 step, and the proper tach adapter 250 shipped http://good-times.webshots.com/photo/2797575500096549235upvJoxI have an MSD 6 box that was handed to me, should work but it is untested. Take a gamble on it for 30? plus shippingSVO intercooler 30 + shipping. 87-88 style shorter intakes 50 + shipping. http://good-times.webshots.com/photo/2662023970096549235CplQzi Quote Selected
Topic: wheels and 7.5 5 lug disk rear TC interior (Read 1096 times)
previous topic - next topic
