Skip to main content ↑ ↓
Topic: WTB 5.0 rear engine plate (Read 535 times) previous topic - next topic

WTB 5.0 rear engine plate

Unless the 3.8 plate will work I need one for the 5.0 I am putting in. If someone knows if the V6 plate will work let me know please.

WTB 5.0 rear engine plate

Reply #1 –
i imagine they're the same, but don't take my word for it.. if not, i have 1 hanging on my shop wall
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver

WTB 5.0 rear engine plate

Reply #2 –
What do you mean by (rear) engine plate? If its a plate to pull the motor I just made on of these.
X
87 TC
HO Swap, T5 Swap, Mach Springs, CHE Upper and Lower control arms, Mach Chin spoiler, soon to be Procharged.

:evilgrin: Nitrous is like a hot chick with an STD you want to hit it but are scared of the consequences. :evilgrin:

WTB 5.0 rear engine plate

Reply #3 –
the thin plate that goes between the engine and trans is the same, they are trans specific, not engine...
Currently Birdless but never Foxless

86 Mustang GT

WTB 5.0 rear engine plate

Reply #4 –
Oh ok I know what you are talking about now.
87 TC
HO Swap, T5 Swap, Mach Springs, CHE Upper and Lower control arms, Mach Chin spoiler, soon to be Procharged.

:evilgrin: Nitrous is like a hot chick with an STD you want to hit it but are scared of the consequences. :evilgrin:
 

WTB 5.0 rear engine plate

Reply #5 –
Thanks guys I have the plate from the 3.8 along with the AOD so I will just use that one. Again Thanks.
Gdub