Water pump pulley February 25, 2012, 05:04:52 PM Anyone have one they dont need? the on I saves isnt for a ford... which is really disappointing..Oh and the 4 bolts that hold it to waterpump. Quote Selected
Water pump pulley Reply #1 – February 25, 2012, 09:40:00 PM I have one I got a while back that did not fit what I needed it for. I will take a look for it get a pic and the part number off it.. Give me a few... Quote Selected
Water pump pulley Reply #2 – February 25, 2012, 09:59:30 PM Here it is... I bought it because I was missing one for my 3.8 and this one did not line up right.. A little dirty, I do not have the bolts though.. Quote Selected
Water pump pulley Reply #3 – February 26, 2012, 10:08:22 AM Thats my trouble. the motor and all the parts are from a 86 f150. the 5.0 underdrive kit my buddy gave me wont bolt up right.Imma thinkin Ive got a junkyard run comming up Quote Selected
Water pump pulley Reply #4 – February 26, 2012, 04:56:00 PM It wouldn't bolt up to my 3.8 but don't know of it'll fit a 5.0. I didn't try and look up the part number to see what it's from. Quote Selected
Water pump pulley Reply #5 – February 26, 2012, 08:28:10 PM I have one from the original 88 5.0. I just hope your not in a hurry, Im offs till around march 9th. You can have it. Quote Selected
Water pump pulley Reply #6 – February 26, 2012, 09:32:54 PM the pulley pictured above is the same from a 89 mustang 5.0 so it should workas for the bolts you can pick them up at any parts/hardware store. I'm not sure, but I think the threads are M8x1.25 like most of the threads on the engine. Quote Selected
Water pump pulley Reply #7 – February 28, 2012, 09:14:47 AM I figured it was from a 5.0 Quote Selected
Topic: Water pump pulley (Read 526 times)
previous topic - next topic
