Cougar wheels

Topic: Cougar wheels (Read 496 times) previous topic - next topic

Cougar wheels

February 16, 2012, 08:47:01 PM

This is an interesting thought, I have 17" 02 Cougar wheels they are the same 4x108 pattern thats used on the fox cougar/thunderbird. I could put these on my mustang or thunderbird (when it comes back from paint) for caliper clearance if someone is truly interested in them.

tires are junk but hold air
200

located in Pittsburgh PA

Cougar wheels

Reply #1 – February 16, 2012, 08:58:02 PM

forgive my bad photo shop

Cougar wheels

Reply #2 – February 17, 2012, 06:19:11 PM

I'm thinking the offset would be too far off for these to work on our cars!

Cougar wheels

Reply #3 – February 17, 2012, 06:21:08 PM

Ok, that is a good looking Cougar!

Cougar wheels

Reply #4 – February 17, 2012, 08:00:09 PM

Full location required for all ads. Thanks.

Cougar wheels

Reply #5 – February 18, 2012, 12:27:28 AM

Quote from: '85T-BirdTurboCoupe;380981

I'm thinking the offset would be too far off for these to work on our cars!

I will put them on my car to make sure they fit correctly......the turbo coupe is not back from paint yet but I do have my foxbody mustang available for fitment. Could always run a spacer if the offset was too much.

Cougar wheels

Reply #6 – February 18, 2012, 08:10:10 PM

checked this out today, they could work but you would have to use a spacer and the hub center is slightly smaller on the newer wheel. the hub hole probably needs .030" clearance.