Name plate on EFI problem

Topic: Name plate on EFI problem (Read 1613 times) previous topic - next topic

Name plate on EFI problem

December 14, 2011, 04:28:32 PM

The bolt holes are hogged out where my name plate should bolt onto the intake.

I was thinking that I'd just JB weld them shut then make new holes.

Anyone have a better idea?

Name plate on EFI problem

Reply #1 – December 15, 2011, 08:44:44 AM

??? Drill and tap them for a slighty bigger size bolt ??

Name plate on EFI problem

Reply #2 – December 16, 2011, 02:32:48 AM

small helicoil? Kind of overkill, but hell, if it works. (you can tell people your engine makes so much power that the plaque got shook off..lol)

Name plate on EFI problem

Reply #3 – December 16, 2011, 03:36:40 AM

Sheet metal screws. At least that is what I would do.

Or I would just leave the plate off.

Name plate on EFI problem

Reply #4 – December 16, 2011, 08:15:05 PM

i hog it out with a bigger self tapper with purdy gold chromate counter sink phillups,, yep lowes has them.

If thier not self tappers, then just file the end of the bolt at a diagonal at the end so it is.

Name plate on EFI problem

Reply #5 – December 17, 2011, 05:29:30 AM

Thanks for the input guys.