Skip to main content ↑ ↓
Topic: The man in brown left me a present today (Read 761 times) previous topic - next topic

The man in brown left me a present today

X
87 TC
HO Swap, T5 Swap, Mach Springs, CHE Upper and Lower control arms, Mach Chin spoiler, soon to be Procharged.

:evilgrin: Nitrous is like a hot chick with an STD you want to hit it but are scared of the consequences. :evilgrin:

The man in brown left me a present today

Reply #1 –
Build will be a 306 base running 10lb or so boost. With a D1SC procharger. Haven't decided on a cam or intake yet. I really like the looks of the bbk ssi but looks arnt everything.
87 TC
HO Swap, T5 Swap, Mach Springs, CHE Upper and Lower control arms, Mach Chin spoiler, soon to be Procharged.

:evilgrin: Nitrous is like a hot chick with an STD you want to hit it but are scared of the consequences. :evilgrin:

The man in brown left me a present today

Reply #2 –
Very nice !!! Um, he is bringing another one.......right?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The man in brown left me a present today

Reply #3 –
LOL Yes he brought the other one as well. On another note I picked up an Alumimum drive shaft from a CV the other day for $25 woho
87 TC
HO Swap, T5 Swap, Mach Springs, CHE Upper and Lower control arms, Mach Chin spoiler, soon to be Procharged.

:evilgrin: Nitrous is like a hot chick with an STD you want to hit it but are scared of the consequences. :evilgrin:

The man in brown left me a present today

Reply #4 –
Niiiice.

The man in brown left me a present today

Reply #5 –
Quote from: bigbada1;368110
LOL Yes he brought the other one as well. On another note I picked up an Alumimum drive shaft from a CV the other day for $25 woho

 
Dang I picked up a aluminum shaft for the same price on saturday and have it in already, although I'm not sure its worth it yet since I only saved 4 pounds over the steel one.  Havent driven it yet though. 
Good luck on the engine build!

88 t-bird tc - 14.97 @ 90  IHI 18 psi + k+n filter...so far - NOW HX-35 @25psi - 12.75@112    348rwhp/395rwtq
78 F-150 - 11.61@120 on 175shot N20 - 12.55@110 on motor - 5200# race weight:hick:

The man in brown left me a present today

Reply #6 –
What brand are the heads?
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.
 

The man in brown left me a present today

Reply #7 –
They are Engine Works I talked to them before I bought them and they stated they are cast at the same place in Austraila as procomp and then they take the bare castings at engine works and machine them to there specs. They were cheep and I bought them used. Paid $400 for the set with 1.6 roller tip rockers and guid plates The guy I bought them from said they made good power for him he spun a bearing on his ride and needed cash. Im on a limited budget so I thought I would give them a shot. I figure since Im boosting and still running a T5 I dont want to get real crazy and have to replace my trans a week after I put this motor in.
87 TC
HO Swap, T5 Swap, Mach Springs, CHE Upper and Lower control arms, Mach Chin spoiler, soon to be Procharged.

:evilgrin: Nitrous is like a hot chick with an STD you want to hit it but are scared of the consequences. :evilgrin: