Skip to main content ↑ ↓
Topic: WANTED...MN-12 5.0 valve covers.... (Read 989 times) previous topic - next topic

WANTED...MN-12 5.0 valve covers....

Reply #15 –
Hey Vin I had to work late today, wasn't able to make it out to the yard. I'm prolly working late tomorrow, but I might be able to make it out in time. If not I'm pretty sure I'll be able to get out there by Sat at least. I'll let you know when I get out there and get a pic for you.
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

WANTED...MN-12 5.0 valve covers....

Reply #16 –
Do you have any idea what they charge for them They really are nothing that special.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

WANTED...MN-12 5.0 valve covers....

Reply #17 –
I casn probably get them for about 10/15 for both. 20 at most i'd say
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

WANTED...MN-12 5.0 valve covers....

Reply #18 –
Sweet.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

WANTED...MN-12 5.0 valve covers....

Reply #19 –
this is unfortunately the best pic I could get of them. Its a little decieving they're really about 2-1/4" tall. If this is what you're looking for let me know and I'll hafta pull them this weekend. There's two sets so they're not going anywhere.
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

WANTED...MN-12 5.0 valve covers....

Reply #20 –
It's the back side that should be taller. I know you can't measure that. Either way,I'll take them. I'll PayPal you or do a trade,or a partial trade...whatever is good for you. Cheaper the better. What year are those?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

WANTED...MN-12 5.0 valve covers....

Reply #21 –
the ones there are in a 1991 SC that had a 5.0 transplant. But there is a 93 that has the exact same ones in it so I could pull those if you'd rather.

....bugs me to try to figure out why someone would put a 5.0 in  a perfectly good SC....:beatyoass:
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

WANTED...MN-12 5.0 valve covers....

Reply #22 –
I'd rather have the covers from a factory equipped car. There's no telling what the other engine came from and if the covers are what I'm looking for.

As far as it being a perfectly good SC....it IS in the salvage yard for a reason. The Engine probably failed and they had access to a 5.0. Or they were trying to finish a 5.0 swap and failed. Who knows. It's a donor car now.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

WANTED...MN-12 5.0 valve covers....

Reply #23 –
Sarjxxx is hooking me up. SWEEEEEET!!!!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..