ABS to Vac using the M/C with the Plastic res August 26, 2010, 02:02:07 PM Just as the title states everything that I have read utlizes the M/C with the cast res. Has anyone here actually used the M/C with the plastic res? The reason I ask is the M/C with the plastic res already has 3 ports. Also how do you tell what the boor size is on a M/C?? Quote Selected
ABS to Vac using the M/C with the Plastic res Reply #1 – August 26, 2010, 03:03:16 PM you look at the back of it where the rod sits...why do you need 3 ports? with the right combo valve you will not need the 3rd one Quote Selected
ABS to Vac using the M/C with the Plastic res Reply #2 – August 26, 2010, 03:54:02 PM The reason I am asking is I already have the Mustang Booster and M/C. I would like to use this to replace the ABS that is currently in the TC and was just wandering if the ABS system utlizes the 3 ports could I use the Mustange M/C? Quote Selected
ABS to Vac using the M/C with the Plastic res Reply #3 – August 26, 2010, 05:39:56 PM looks like it, I just checked my spare tevs unit the rear and one front run to the combo valve, the other lie is direct to the caliper Quote Selected
ABS to Vac using the M/C with the Plastic res Reply #4 – August 26, 2010, 05:47:36 PM when I did my swap I used the SVO M/C with a little plumbing and some fittings and all has been well and the stopping power is much better than the ABS....http://www.turbotbird.com/techinfo/Converting_TC_ABS_MC_to_Vacuum_Assist_Brakes.htm Quote Selected
Topic: ABS to Vac using the M/C with the Plastic res (Read 1012 times)
previous topic - next topic
