84 radio wiring

Topic: 84 radio wiring (Read 2408 times) previous topic - next topic

84 radio wiring

October 11, 2007, 06:29:27 PM

I bought a really nice 84, but as usual, the guy put a new Pioneer in and the dash lights don't work. All I need is the original radio wiring diagrams. Thanks

84 radio wiring

Reply #1 – October 11, 2007, 07:10:25 PM

coolcats.net go there dash lights not working the idiot shouldent have cut the factory harness shoulda got the 8$ part to not cut into the harness.........

84 Cougar radio wiring

Reply #2 – October 12, 2007, 10:55:05 AM

Thanks for the info. Yeah, the guy told me it was installed by Best Buy, but I have my doubts. If that were the case, I would hope it would've been more professional.

84 radio wiring

Reply #3 – October 12, 2007, 11:53:05 AM

I don't think coolcats.net has that information.

But Carm does on his site:
http://www.foxthundercats.com/tech/wiringdiagrams/84usunderdaship.pdf

If you can't find what you need there, post back here and I'll scan the diagrams from my '84 EVTM.

84 radio wiring

Reply #4 – October 12, 2007, 04:58:27 PM

Thanks, Eric, but I guess I need the other diagrams. Thanks

84 radio wiring

Reply #5 – October 12, 2007, 06:18:31 PM

Here are some 84 radio diagrams. They are on my old ISP's free space. I can no longer access it to add to it or erase it so I guess it is there forever.

84 radio wiring

Reply #6 – July 26, 2010, 04:44:14 AM

I cut off the wires from a good radio out of my 84, just so I could have the harness for a CD player adapter. No need to buy the 10 dollar Autohole adapter.

With these diagrams I can wire up the system.

84 radio wiring

Reply #7 – July 26, 2010, 12:56:19 PM

These diagrams are not showing radio illumination wiring. Dash lights and radio illumination when the headlight switch is on is the light blue wire with a red stripe. Sometimes there are two of these wires joined together at the same harness connector pin. If one of the wires is cut and not joined with the other, then it will interrupt the supply of current needed for other lights in the dash.

It is also a possibility that if the lt.blue/red wire was connected the connection is not good.