Skip to main content ↑ ↓
Topic: wastegate actuator (Read 1124 times) previous topic - next topic

wastegate actuator

does anybody where i can buy a new wastegate actuator at for an airesearch t3?
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

wastegate actuator

Reply #1 –
look on ebay they should have a few. and i would think one off of a t3/t4 would work.
2001 Buick Regal LS (DD):hick:

Got that fox rash again!

-Resident smartass! :ies:

- Don't listen to the naysayers. For every person who actually helps with your project there will be 10 who will discourage you all the while thinking that they are helping. 99% of all people have good intentions. That doesn't make them right.- XR7 Dave - SCCOA.Com

wastegate actuator

Reply #2 –
the stock one from a 83-86 TC should fit
1985 TC (yet another one) Fully loaded
has 225k mile  still with the factory head gasket






84  Turbo ranger  Daily driver  ($800.00 Ebay deal)
          volvo FMIC and more getto rigging than the law should allow

wastegate actuator

Reply #3 –
i found this one, do you think it will work?  http://www.google.com/imgres?imgurl=http://www.treadstoneperformance.com/~treadstone/prod_imgs/img-155-0-large.jpg&imgrefurl=http://www.treadstoneperformance.com/~treadstone/product.phtml%3Fp%3D155%26cat_key%3D303%26prodname%3DGarrett%2BT3%2BTurbo%2BWastegate%2BActuator%2B%2526%2BBracket&usg=__tOuvbDwe-nN6leR1nCNOIWkwod0=&h=705&w=640&sz=27&hl=en&start=3&um=1&itbs=1&tbnid=glGBuzynhpe42M:&tbnh=140&tbnw=127&prev=/images%3Fq%3Dt3%2Bturbo%2Bactuator%26um%3D1%26hl%3Den%26tbs%3Disch:1
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke:

wastegate actuator

Reply #4 –
yes sir it will.
2001 Buick Regal LS (DD):hick:

Got that fox rash again!

-Resident smartass! :ies:

- Don't listen to the naysayers. For every person who actually helps with your project there will be 10 who will discourage you all the while thinking that they are helping. 99% of all people have good intentions. That doesn't make them right.- XR7 Dave - SCCOA.Com

wastegate actuator

Reply #5 –
I see no reason it would not.....
1985 TC (yet another one) Fully loaded
has 225k mile  still with the factory head gasket






84  Turbo ranger  Daily driver  ($800.00 Ebay deal)
          volvo FMIC and more getto rigging than the law should allow
 

wastegate actuator

Reply #6 –
alright good! just bought it : ) im ready to finally control my boost...
1987 turbo coupe 5speed: Boport stage 3 head/2.5 cam , Precision stage 3 50trim .63 turbo, Tial 38mm wastegate, Jangus gutted/ported intake manifolds, 60mm tb, Jangus open dumptube, Jangus 3" elbow, Perrin boost controller,Esslinger adjustable cam pulley, Esslinger small crank pulley, stinger FMI, RFL BOV, Spec stage 3 clutch, B&M short throw, 140 speedo, Walbo 255lph, BBK fpr, 3G alternator, ARP studs.  Be faster... :poke: