Skip to main content ↑ ↓
Topic: 5.0L upper plenum plate (Read 1132 times) previous topic - next topic

5.0L upper plenum plate

Reply #15 –
send that bad boy my way! save me from painting it red! thanks, dwight

5.0L upper plenum plate

Reply #17 –
Do you need more?

5.0L upper plenum plate

Reply #18 –
All my explorer plates have 4 holes, just have a bit of paint or sealant in the unused ones. Not sure there is such a thing as a two hole explorer plate.
87 Thunderbird 5.0
Engine: 97 p-code explorer block, heads, and intake; 88 HO cam, 1.7 RR's, A9P, Kenne Bell 2.1 Flow/Blow 8psi, 42lb injectors, LMAF, 75mm TB, Tuned by Don Lasota
Trans: 02 Stang 4r70w with Baumann TCS
Suspension: Front: 03-04 cobra springs and struts, TC rack. Rear: CHE arms, ChuckW shock mounts, Bullitt springs and shocks
5 bolt with 95 mustang front and mark vii rear.
TC 3.73 L/S rear
03-04 SVT Cobra 17x9's with 275/40r17's.
 

5.0L upper plenum plate

Reply #19 –
My Explorer plate has two holes. All of my Explorer plates have only had two holes. There are two fake holes (little indentions),but only two actual holes for the fasteners.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..