Skip to main content ↑ ↓
Topic: Random fasteners (Read 360 times) previous topic - next topic

Random fasteners

These are not easy for me to obtain without stripping a car - if anyone has random nuts and bolts from around these cars, I'd like to pay for some and get them shipped in an envelope or something. Over the years I have lost more and more fasteners and while I may still have them, it also gets difficult to find what's what.

I only ask that they be taped up or thrown into baggies and marked as to what they came from. Currently I am mostly interested in the parts that hold the front lights, header, bumper cover, and fenders on but just about anything else I would prefer to have on the side for a later day also. What's a few extra dollars if you already have the fasteners taken off from parting vehicles out? ;)

It depends on the parts but jut post your asking price shipped in an envelope to Vancouver, WA. I will keep this thread open for awhile as this is something I will like to receive on an ongoing basis for some time. I would like to receive at least 2 sets of different fasteners before I will be happy with what I have.

This is on a 88 Sport and I believe just about every fastener is still stock (some exclusions for aftermarket suspension, brakes, etc).
1988 Thunderbird Sport

Random fasteners

Reply #1 –
I can let you know what I have after my car is back together again.. I know I have a whole bunch of everything for a bird
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Random fasteners

Reply #2 –
I just pulled a 88tc apart.. Ill load you a box of bolts screws up from it and get them shipped to you if you like...just a bunch of random nuts/bolts screws.... not sorted
1985 TC (yet another one) Fully loaded
has 225k mile  still with the factory head gasket






84  Turbo ranger  Daily driver  ($800.00 Ebay deal)
          volvo FMIC and more getto rigging than the law should allow

Random fasteners

Reply #3 –
Thanks guys - I am always looking for more though. I have a bag of random screws from the dash but never had certain ones I was missing when pulling things apart there.

I will likely take some time trying to organize what's what so I have something a little better than a large box of random fasteners ;)

PM sent to you BogusSVO and looking to hear back daminc. I figure that if something can save me time in the future, it's worth buying it (with limits of course).
1988 Thunderbird Sport

Random fasteners

Reply #4 –
Bump - any updates or anyone else have some offerings? I still haven't received any fasteners :(
1988 Thunderbird Sport
 

Random fasteners

Reply #5 –
PM me a list of your needs.I have a bunch of fasteners.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..