Need some SN95 Help

Topic: Need some SN95 Help (Read 951 times) previous topic - next topic

Need some SN95 Help

April 09, 2010, 10:29:43 AM

I've just made a sale on (Buy-it-Now) and the person wants me to cancel it if the item wont work for a 351W (They paid already)... WTF?

It's Spider Tray + Dog Bones pulled from a 94-95 V8 Mustang.

Anyone know if this is a direct 351 swap over?
From what i can tell, It looks to be~But need to be sure.

Pic:

Need some SN95 Help

Reply #1 – April 09, 2010, 02:26:48 PM

i think it depends on wether its a roller or flat tappet block 351. did he say what year is engine was?

Need some SN95 Help

Reply #2 – April 09, 2010, 05:02:23 PM

Cut and Paste:
"say dose this fit a roller 351w? if not i wish to cancel the trans action im sorry for the incovinence"

Need some SN95 Help

Reply #3 – April 09, 2010, 05:27:21 PM

Quote from: Romeo2k;317591

Cut and Paste:
"say dose this fit a roller 351w? if not i wish to cancel the trans action im sorry for the incovinence"

Response:

Too Bad!!! Check before you buy next time! :) Just kidding of course....... Sorta :)

Need some SN95 Help

Reply #4 – April 09, 2010, 05:43:29 PM

Just say, "Let me know if it fits when you get it."

Need some SN95 Help

Reply #5 – April 09, 2010, 06:18:26 PM

I'd tell him that if it fits,good,if not,send it back at his cost for a refund.It's good business.I know people can make a mistake,and I tend to work with people.It keeps the business coming back.

Need some SN95 Help

Reply #6 – April 09, 2010, 06:34:29 PM

His fault for bidding,plain and simple.
A bid is a binding contract.
If he's paid and it does not work let him deal with it or resell it.
However i believe it does work but if it's none roller he will have to drill and tap the block in the center where the spider mounts.
302-351 are basically the same block but the 351 has almost an inch taller deck height.

Need some SN95 Help

Reply #7 – April 09, 2010, 09:13:15 PM

my response:

"i dont know. here is your tracking number: XXXX"

Need some SN95 Help

Reply #8 – April 09, 2010, 10:19:37 PM

Quote from: gumby;317604

my response:

"i dont know. here is your tracking number: XXXX"

Sweet response!!

Need some SN95 Help

Reply #9 – April 09, 2010, 11:23:13 PM

They are the same.
Even if it isn't a roller block it could still be used with a small base circle retrofit cam if he drills and taps the valley.

xjeffs + gumby =

Reply #10 – April 10, 2010, 03:20:11 AM

Quote

Here is your tracking number: xxx.
Let me know when you get it.