1998 Cobra Springs?? March 21, 2010, 07:12:40 AM I know that SN95 Bullitt/Mach 1 spring are suggested for the swap but what about '98 Cobra springs?? I found a set of four locally. Quote Selected
1998 Cobra Springs?? Reply #1 – March 22, 2010, 01:58:17 PM I used a set from a 99 GT. The rears were too soft/short. The fronts were perfect. I put the stock springs back in the rear and I am very happy with the result. I have about 2 inches between the top of the tire and the fender lip all around. It feels much tighter in the front as well. Quote Selected
1998 Cobra Springs?? Reply #2 – March 22, 2010, 04:41:40 PM I also used stock '99 SN-95 Stang springs.Very good handling,lowered about 2 inches all around,stiffer,but not uncomfortable (I want the car to be a good all purpose car). Quote Selected
1998 Cobra Springs?? Reply #3 – March 22, 2010, 04:47:21 PM Quote from: vinnietbird;315333I also used stock '99 SN-95 Stang springs.Very good handling,lowered about 2 inches all around,stiffer,but not uncomfortable (I want the car to be a good all purpose car).I've always wondered how you used the rear springs. When I put mine on it was slammed in the rear. It rode like junk. I was afraid of getting pulled over for trafficking withe the trunk slammed to the ground (San Antonio, you know what I mean). Did you use spacers in the rear? I've seen other cars with GT springs and they had the same problem. Quote Selected
Topic: 1998 Cobra Springs?? (Read 1186 times)
previous topic - next topic
