How to surface a flywheel February 17, 2010, 01:10:37 PM How To Resurface a FlywheelI need to replace the clutch, and I want a “new” clutch surface on my flywheel so the clutch will operate problem free.The first step is to have the flywheel cleaned of oil , grease and grime.This flywheel is in decent shape minimal warp and few hot spots I found my Ford Dark Blue Spray Paint!!Next is to mount the flywheel to the machineMove the flywheel under the grinding stone, and touch off….Each pass is only .002 -.003 deep per cutSee the sparks?Now that we have a good surface for the clutch disc to mate too… One last thing to do is to knock in the pressure plate alignment pins All done… Quote Selected
Topic: How to surface a flywheel (Read 635 times)
previous topic - next topic
