Skip to main content ↑ ↓
Topic: just installed sequentials (Read 1643 times) previous topic - next topic

just installed sequentials

After doing alot of research I found the cheepest way to install sequential signals. $59.95 for a 96-04 mustang kit.

here is the result


http://www.youtube.com/watch?v=0ne9aVR1Zzs

there is one module per a side.

FORD The Pacemaker of a CHEVY

just installed sequentials

Reply #1 –
Nice job.I've had mine in my car for about a year or so.I love them.One of my favorite things on the Sport.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

just installed sequentials

Reply #2 –
And to think, mine were so much higher quality than those :D I mean, what are they, wrapped in electrical tape?
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

just installed sequentials

Reply #3 –
Quote from: Thunder Chicken;317772
And to think, mine were so much higher quality than those :D I mean, what are they, wrapped in electrical tape?


X2, yours were very high quality.:D
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

just installed sequentials

Reply #4 –
Which reminds me Thunder Chicken...I need to send money for the upgraded relay.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

just installed sequentials

Reply #5 –
I think it was just dipped into plastidip.

I have an old unit from a 1970 cougar and a mechanical unit from an old t bird. It's amizing the difference in size.
FORD The Pacemaker of a CHEVY

just installed sequentials

Reply #6 –
Quote from: Thunder Chicken;317772
And to think, mine were so much higher quality than those :D I mean, what are they, wrapped in electrical tape?


I STILL haven't installed that set I bought from you for my S197......

Hopefully I'll remember to bring them when I do the new rear at my friend's shop next Saturday...
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

just installed sequentials

Reply #7 –
Nice. But I did like the quality of Thunderchicken's design. That was a tough piece. That one just looks like......nothing really.
1988 Thunderbird Sport. Work in Progress
5.8L swap w/fitech efi, 4R70W swap w/quick 4 controller, 2003 GT rear diff, 5 Lug swap

Bought this car back as an old project car.

:burnout:

just installed sequentials

Reply #8 –
The set I bought from ThunderChicken is still sitting in my trunk of the Coug..I knew I was forgetting to install something.
"Real cars dont power the front wheels, they lift them"
[SIGPIC][/SIGPIC]
1984 Mercury Cougar GS 5.0:cougarsmily: BBK Equal Length Shorties, BBK O/R X-Pipe, Magnaflow Magnapacks, Mustang GT Stainless Tailpipes, 18" Magnaflow Rolled Edge Tips. Turbo Coupe Hood, Mach 1 Chin Spoiler. 17"x9" Cobra R's, Falken Ziex 255/50s, and 245/45s.
1984 Ford Thunderbird 3.8L "Drag Queen"
2009 Dodge Ram 1500 Lone Star Edition 5.7L Hemi 400hp, lex DOD14M Magnaflow retro-fit ler kit

just installed sequentials

Reply #9 –
This looks like the same simple inexpensive kit I used on my 08 Mustang and I have had no trouble with them.

I just got a set of 85-86 taillamps from Dansbird and I have been cleaning them today. I so want to incorporated sequential turn signal action and they only way I will be able to do it is find LED lamps mounted on flat circuit boards and mount them inside the taillamp housing. You lucky Cougar and 87-88 Bird s!
 

just installed sequentials

Reply #10 –
Quote from: Watchdevil;317807
You lucky Cougar and 87-88 Bird s!


Somebody has to drive them.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..