Skip to main content
Topic: Any professional drywallers in the house? (Read 1854 times) previous topic - next topic

Any professional drywallers in the house?

Reply #15
I was also thinking about a hot tub this summer. not sure about gas heat or electric though
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Any professional drywallers in the house?

Reply #16
Quote
but it sounds like it would be best to wait and see what they prefer to do for this spot.
I'd get strapping, strap the whole ceiling, drop your lights and let the hangers tear into it, but that's me. Should go quick and easy. Ive never actually seen someone drill holes through the floor joists for electrical or plumbing runs like that (excluding engineered lumber). Not that i noticed anyway.

Quote
I'd line the bathrooms and garage floors with pex for radiant heat.   
Oh hells yeah. I heart radiant heat. I don't have it, but i love it. One of my old bosses actually has radiant heat in his driveway and walkways. Usually don't have to clear it from snow.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

 

Any professional drywallers in the house?

Reply #17
Quote from: shame302;302756
I'd get strapping, strap the whole ceiling, drop your lights and let the hangers tear into it, but that's me. Should go quick and easy. Ive never actually seen someone drill holes through the floor joists for electrical or plumbing runs like that (excluding engineered lumber). Not that i noticed anyway.


I've decided to get a couple of quotes and ask them what, if anything, they prefer me to do in that spot.

I didn't want it to "feel" like a basp00get so in order to get the ceiling to be as high as possible (finished it will be 7' 9") I had all of the plumbing movied up into the joists.
It's a pretty common thing to do when finishing a basp00get. Local building codes may vary, but if you follow these guidlines for drilling you should be within code.

Brent
1985 Mercury Cougar XR-7 - 5-speed 
One of 1,246 built