Skip to main content
Topic: Pros/Cons of Running 225 50R16? (Read 1326 times) previous topic - next topic

Pros/Cons of Running 225 50R16?

Got a set of new tires in 225-50R16, the stock TC wheel is 225-60R16.  Aside from the speedo being off, is there anything that I should be concerned about running this tire set?  its a 1.7" difference in tire height which will lower the car some more.

Pros/Cons of Running 225 50R16?

Reply #1
Bigger fender gaps, bit harsher ride. It'll look goofy. It wont look lowered.

A better idea is a 245/50-16. Gives it a little more sidewall but still lower profile because of the wider tread. Also closer to stock height.
93 Festiva L, 193k miles, BP+T/G25MR swap, T3 50trim .48/.42, SRT FMIC, Capri electronics/Rocketchip, 2.5" exhaust
bests: ET 12.86, MPH 110.25, 1.92 short
02 Subaru Impreza WRX, 129k miles
97 Subaru Impreza Outback Sport, 236k miles

Pros/Cons of Running 225 50R16?

Reply #2
Its already on a 1" drop, who knows I suppose.  The tires were free and I need them badly to replace my dry rotted ones from the car sitting the past two years.  Im not too worried about the harsher ride, its not a daily driver anymore.

Pros/Cons of Running 225 50R16?

Reply #3
Well you cant argue with free.
93 Festiva L, 193k miles, BP+T/G25MR swap, T3 50trim .48/.42, SRT FMIC, Capri electronics/Rocketchip, 2.5" exhaust
bests: ET 12.86, MPH 110.25, 1.92 short
02 Subaru Impreza WRX, 129k miles
97 Subaru Impreza Outback Sport, 236k miles

Pros/Cons of Running 225 50R16?

Reply #4
I run 225/55/16s on Snowflakes. Works fine for me.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Pros/Cons of Running 225 50R16?

Reply #5
I'm running 225-50/16's on snowflakes, and with a stock ride height, the tire to body gaps are a little larger than I'd like.  I really need to get around to installing the 95GT springs I bought. I really like the way they ride and stick in the corners.
88 TC 5speed, 168000+ miles, stock 2.3T long block, ported RFE6 exhaust, Evergreen T3 running 15#'s.
Up next: FMIC, fresh air intake, ported intakes, ported big valve head.

 

Pros/Cons of Running 225 50R16?

Reply #6
i think ford should have put them on from the begining, i say put the on.