Question about Mark VII spindles May 15, 2009, 06:26:48 AM My question comes from here:Quote from: Coolcats.net Tech SectionSpindlesYou can use spindles from either the 1987-93 V8 Ford Mustang or a 1987-88 Turbo Coupe; they're both the same parts. You can get them used at a salvage yard or online. The 1984-92 Lincoln Mark VII spindle will fit but requires modification of the ball joint--avoid it if possible.Exactly what is this modification that is required? I'd like to know just for curiosity. Quote Selected
Question about Mark VII spindles Reply #1 – May 15, 2009, 09:44:12 AM Ball joint is wider where it attaches to the spindle. Quote Selected
Question about Mark VII spindles Reply #2 – May 15, 2009, 09:48:07 AM The ball joint "stud" is bigger than the rest of the Foxes, thus the hole in the spindle is larger.There is available (or at least used to be) an adapter sleeve that goes over the Fox balljoint to allow you to use the SVO/Lincoln spindles. I used them WAY back when on the old black '83 we had when I converted it to the 11" stuff (had the spindles left over from my SVO-suspended Capri). Quote Selected
Question about Mark VII spindles Reply #4 – May 19, 2009, 08:28:42 PM Quote from: Chuck W;272457There is available (or at least used to be) an adapter sleeve that goes over the Fox balljoint to allow you to use the SVO/Lincoln spindles. This? Quote Selected
Topic: Question about Mark VII spindles (Read 814 times)
previous topic - next topic
