Skip to main content
Topic: 5.0HO Engine WANTED: IM BEGGING!! (Read 793 times) previous topic - next topic

5.0HO Engine WANTED: IM BEGGING!!

My junkyard owners are a bunch of nut jobs who just for some reason will not do any business with anyone unless they are body shops or garages.

My 5.0S.O. is beat.

Anyone in the PA, OH, NY, MD area have or know of a yard that has a 5.0HO fuel injected w/ harness, computer so that I can do the swap before CJ??

Pretty much I am on my knees trying to find anything.  I came across a 351M about 40 miles away, this morning but I do not want those due to the lack of performance. And would much rather stick with the 5.0 for cost and simplicity at the moment.

5.0HO Engine WANTED: IM BEGGING!!

Reply #1
I have a 5.0 SO and all the HO parts to convert it in MD on my way to work, pm me and Ill get back to ya this evening around 6ish.

5.0HO Engine WANTED: IM BEGGING!!

Reply #2
You don't need a new harness unless you're going from a 6 to an 8.There are H.O engines all over Ebay.It wouldn't be hard to build your own.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0HO Engine WANTED: IM BEGGING!!

Reply #3
Buddy, trust me when I say use http://www.car-parts.com its saved my a$$ many times.


5.0HO Engine WANTED: IM BEGGING!!

Reply #5
is maine too far? can do $300 if you pick it up,99k on it,
'83 Cougar *the never ending project* warmed over 306 v8,c4,8.8 posi with 5 lug conversion
'91 mustang strictly street-in progress
'00 f150 7700-Mean Green: jet stage 1 chip,ported upper intake with 1" spacer,'04 Super Duty intake with injectors,summit racing short tube headers with true 2.5" duals with smithy's glasspacks!


5.0HO Engine WANTED: IM BEGGING!!

Reply #7
Go to Harry's U-Pull-It. Maybe Hazleton is near you? Find one and you can pay them to torch it out or remove it yourself.

 

5.0HO Engine WANTED: IM BEGGING!!

Reply #8
I dont know how far you are willing to travel but there is a J/Y near me that only deals in Ford products. Not sure if they would have what you want but might be able to help. My wife has relatives in the Brookville area and that is about 1 3/4 hours from here and if I remember being down there Dubois was just a bit further down 80. Anyway send me a note if you want and I can get their info for you.