Skip to main content
Topic: manuel steering? (Read 907 times) previous topic - next topic

manuel steering?

If I wanted to go manuel steering on my 88 tc what rack(if any) could I use? will the fox stang work?

manuel steering?

Reply #1
yes a manuAl steering rack will work from a fox mustang/ltd/capri/etc
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


manuel steering?

Reply #2
manUEL steering......

i knew him, he was from Tijuana... i think he drove an el camino..... nice guy


OOOH!!!  I'm a Eco Hypermiler :burnout: Not bad for 79mph on the interstate 2hours a day

manuel steering?

Reply #3
would going to manual gain any more clearance from the oil pan?
1987 TC

manuel steering?

Reply #4
If you run a flaming river rack you will want SN95 inner tie rods
 to get enough width.




SCT Tuned by Me(Greg@SpeedyDyno.com)

E.T. 10.28 @ 136.5 MPH 1/4 mile: List of Mods; 351 EFI, AFR heads,AOD,Rousch 13in frt brakes,11in rear brakes, AirRide Tech air ride system, Sub frame connetors,2400 RPM stall, 3.50,BBK shorties,T62PT Turbos  air to air intercooled, Home built kit.
Car weights 3705lbs without driver:burnout:

 

manuel steering?

Reply #5
Quote from: 5.8fastcat;245896
If you run a flaming river rack you will want SN95 inner tie rods
 to get enough width.


thanks, do i need to get the tie rod ends from flaming river or will moog work?