Will this fit February 27, 2005, 03:36:28 AM Im not sure what its for or if it will fit my cougar but check it out and tell me what you thinkhttp://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33733&item=7957411125&rd=1 Quote Selected
Re: Will this fit Reply #1 – February 27, 2005, 06:23:10 AM QuoteIm not sure what its forSilly boy, it says right there... "87-93 Mustang". :hick: It'll be for the neutral-start switch and backup lights.Mustangs had cable speedos, so no hookup for our electronic ones. Quote Selected
Re: Will this fit Reply #2 – February 27, 2005, 01:56:37 PM I know what car its for i wanted to know what it does will it fit and how do i fix the speedo thing? Quote Selected
Re: Will this fit Reply #3 – February 28, 2005, 01:58:51 AM Back-up light harness/neutral safety switch - This is Ford part # E7ZZ-15525-A if you're buying new, or if you're savvy enough, cut the AOD connector off and rewire to match the T-5 connector (I just rewired mine). from the proud sponsor at coolcats.net.............http://www.coolcats.net/tech/advanced/t5_conversion.html Quote Selected
Re: Will this fit Reply #4 – February 28, 2005, 10:05:53 AM I used a Mustang t5 harness in my car. I just shortened it down a bit, since it connects under the radio, as opposed to the driver side kick panel in a Stang. It made the wiring very convenient, since there is a separate,shorter harness on the t5 that the body harness connects to.Your speedo will work with the old sender off of your AOD. Since you don't need the mechanical speedo connection that the Mustangs use, just swap the old sender into the new transmission. The electronic speedo uses the vss on the sender. You have to change the speedo gear on the end of the sender to the t5 gear, since the AOD gear is different. Quote Selected
Re: Will this fit Reply #5 – February 28, 2005, 12:24:02 PM well, i didnt bother with it. in my case i just wired in the reverse light switch and short wired the neutral safety switch. i just have to remember to either put the car in neutral or put the clutch in when starting it. nobody drives my car without me. Quote Selected
Re: Will this fit Reply #6 – March 01, 2005, 10:12:27 AM Quote i just have to remember to either put the car in neutral or put the clutch in when starting it. Dude there is a switch on the tranny and the pedal assy for that. Pick one or both and use it. Why have a potential accident waiting to happen. Quote Selected
Re: Will this fit Reply #7 – March 01, 2005, 10:47:02 AM i know there is....maybe when i have time. like i said, nobody drives the car but me. i didnt have a harness to use anyway and didnt realy feel like making one. ive only put 100 miles on it since the t5 anyway. when i actually start to drive the car when the weather gets better i will probably "finnish" it the right way. i mostly just wanted to get it together because i dont have any storage for parts. Quote Selected
Re: Will this fit Reply #8 – March 01, 2005, 10:56:00 AM never looked throught your pic gallery thunder306. nice...what strut tower brace are you using? Quote Selected
Topic: Will this fit (Read 2361 times)
previous topic - next topic
