Anybody know a good yet inexpensive sheetmetal guy? January 26, 2008, 03:01:02 PM An idea popped into my head...I'd need a custom adapter to mount any one of these: http://cgi.ebay.com/ebaymotors/07-08-MUSTANG-SHELBY-GT500-USED-SUPERCHARGER-75_W0QQitemZ290201364885QQcmdZViewItem?hash=item290201364885http://cgi.ebay.com/ebaymotors/03-04-COBRA-SUPERCHARGER-EATON-M1112-BLOWER-MUSTANG_W0QQitemZ260205068241QQcmdZViewItem?hash=item260205068241http://cgi.ebay.com/ebaymotors/Mustang-Thunderbird-Supercharger-complete-kit_W0QQitemZ150209549479QQcmdZViewItem?hash=item150209549479http://cgi.ebay.com/ebaymotors/Ford-3-8-supercharger-kit-mustang-eaton-90-HOT_W0QQitemZ250208836006QQcmdZViewItem?hash=item250208836006http://cgi.ebay.com/ebaymotors/03-04-Mustang-Cobra-SVT-Supercharger_W0QQitemZ160201829389QQcmdZViewItem?hash=item160201829389to a lower intake on a 5.0 (or perhaps something else:hick: ) Quote Selected
Anybody know a good yet inexpensive sheetmetal guy? Reply #1 – January 26, 2008, 03:28:03 PM QuoteThat is a custom CNC machined adapter to put a Lightning M112 Eaton blower onto a GT40 lower manifold. This was made by TJ's Performance (tjsperformance.com). If I go this route, I will modify the M112 to have a side entry instead of top. I dont think this setup will fit under an Explorer's hood with current throttlebody setup.old thread, but looks like the same guy linked in the above quotehttp://www.corral.net/forums/showthread.php?t=856359&highlight=M112+adapter Quote Selected
Anybody know a good yet inexpensive sheetmetal guy? Reply #2 – January 26, 2008, 03:45:44 PM http://www.magnusonproducts.com/I know they make at least a 302/5.0 intake, and probably a whole lot more... Quote Selected
Anybody know a good yet inexpensive sheetmetal guy? Reply #3 – January 26, 2008, 03:48:12 PM Exactamundo the kind of work I was looking for, but I was wondering if anybody knew of anyone firsthand? Maybe someone they had personally dealt with? Quote Selected
Anybody know a good yet inexpensive sheetmetal guy? Reply #4 – January 26, 2008, 08:56:48 PM i'll bet you could simplify it alot by adapting it to a newer carb/throttle body upper... Might make it way to tall though... Quote Selected
Anybody know a good yet inexpensive sheetmetal guy? Reply #5 – January 26, 2008, 09:13:55 PM Quote from: Haystack;200109i'll bet you could simplify it alot by adapting it to a newer carb/throttle body upper... Might make it way to tall though...The idea is to make it fit UNDER my existing hood...EV-14 style injectors will have to be used... Quote Selected
Topic: Anybody know a good yet inexpensive sheetmetal guy? (Read 997 times)
previous topic - next topic
Topic: Anybody know a good yet inexpensive sheetmetal guy? (Read 997 times)
previous topic - next topic