Skip to main content ↑ ↓
Topic: 5.0 5 speed block plate needed.... (Read 656 times) previous topic - next topic

5.0 5 speed block plate needed....

Anybody got one they really don't need.Trade or $$.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 5 speed block plate needed....

Reply #1 –
Got one today at the boneyard I've gone to for the last 10 years.He said he had one in a pile of stuff in the building and he gave it to me.No charge.COOL !!! So,one step closer to getting the 5 speed in.I have to get a clutch kit,and a pressure plate,and I've got everything.Gettin' a little excited !!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 5 speed block plate needed....

Reply #3 –
I saw that and was watching it,or one like it.I am always looking though, and I found one for free.That fits my budget.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 5 speed block plate needed....

Reply #4 –
Quote from: vinnietbird;210707
Got one today at the boneyard I've gone to for the last 10 years.He said he had one in a pile of stuff in the building and he gave it to me.No charge.COOL !!! So,one step closer to getting the 5 speed in.I have to get a clutch kit,and a pressure plate,and I've got everything.Gettin' a little excited !!


I didn't even see this post lol.. so what clutch you going with?
[SIGPIC][/SIGPIC]

5.0 5 speed block plate needed....

Reply #5 –
I don't really know yet.My buddy works in the commercial dept.at Autozone,and he can hook me up for 20% off.I'll see what they have to offer.I don't really need a full race clutch.Just a good clutch that can take a little abuse,and not cost a fortune.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 5 speed block plate needed....

Reply #6 –
make sure you get the dowel pins for the pressure plate. I almost forget them.

Did you put the pedel assy in yet? Have fun with the top bolt on the left side. I was just fighting with that sucker today I was putting the brake-boaster and master cylinder back in my cougar. Taking the seat out does make it alittle easier.

Good luck with it, let us know when you do it. Your going to love it when its done
[SIGPIC][/SIGPIC]

5.0 5 speed block plate needed....

Reply #7 –
I haven't even started yet.I will pull the driver seat and back seat (bottom) out for maximum space.I hope to take a couple of extra days off soon,and I'll swap in the pedals at that time.No big hurry,the Sport isn't going anywhere.I have a lot to do.I just have to do it.The replacement fender will probably go on saturday,or Friday after work.I still have a little prep work to do on it.I'm also hoping to get the header panel sanded and primed.One step at a time.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 5 speed block plate needed....

Reply #8 –
Well,I STILL need the block plate.I think the one I got for nothing was for a small block Ford,but the starter bolt holes are wrong,and it isn't the right one after all.


NEEDED.....One 5.0 5 speed block plate.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 5 speed block plate needed....

Reply #9 –
sounds like you got one for a 164 tooth flywheel. small bell C4's and T5's use a 157 tooth.

i would just pick that one up on ebay.
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

5.0 5 speed block plate needed....

Reply #10 –
I may just do that.I'm going to the boneyard Saturday morning and I'll take one last look around before I go that route.No big deal,I'm not ready to install the 5 speed yet anyway,but,I surprise myself every once in a while with a cool find.Maybe Saturday will be one of those days.I know there are two TC's out there (no block plate for me there,but maybe something else cool).Thanks.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 5 speed block plate needed....

Reply #11 –
Ebay is where I got mine from. It think it was that same seller too.
Matt
1984 Thunderbird - 89 302 HO, GT40 heads w/ Trick Flow springs, E303 cam, Edelbrock Performer 289 intake and 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax lers, Mustang AOD and shifter, Mustang 8.8 w/ 3.73s, 3G alternator, Mustang front and rear sway bars, KYB 87-88 Turbo Coupe shocks and struts, and 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter w/ Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax lers, 3G alternator, aluminum radiator, and 3.27 gears.
 
1986 Cougar 5.0, 1989 Mark VII LSC 5 speed, 1980 Mercury Zephyr 4 door (sold)

5.0 5 speed block plate needed....

Reply #12 –
That may be where I get mine as well.As I stated,I'm going to try this last salvage yard Saturday morning and see what they have if nothing,Ebay here i come.I may have to wait for the Ebay purchase for a week,I just bought those Flowmasters,and there went my block plate plate money.I'm not worried,I'll get one eventually.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

5.0 5 speed block plate needed....

Reply #13 –
I got one, I was just looking at it today. It has some rub marks from when someone installed the wrong weight on his flywheel :hick: .  If I have a box, just pay the shipping.

Jim