Clutch questions- FIXED

Topic: Clutch questions- FIXED (Read 949 times) previous topic - next topic

Clutch questions- FIXED

December 16, 2007, 09:09:05 PM

1 how tight is the cable supposed to be?

I tried to hook up my cable but alas, it was too short! wtf? anyone else have this problem?

Clutch questions- FIXED

Reply #1 – December 16, 2007, 10:35:34 PM

does your pedal have the adjustment on it? make sure that you are at the begining of your adjustment before trying to hook up the cable. from what I remember of hooking those up the do fit kinda tight.

Clutch questions- FIXED

Reply #2 – December 17, 2007, 09:46:37 AM

mines very tight. talkin 1 inch before i can get to the clutch fork lol

Clutch questions- FIXED

Reply #3 – December 18, 2007, 08:40:24 AM

I used the FRPP adjustable cable with a firewall adjuster and there is probably only a little over an inch of therads through the clutch fork. The non-adjustable cable was about 2" too short.

Clutch questions- FIXED

Reply #4 – December 20, 2007, 11:38:33 AM

I had the same issue, but I'm using an experimental quadrant. I only have to push the pedal about an inch. The nut at the end of the cable only has about two thread pitch sticking out. Next time I have the tranny out (Lord forbid that I have too) I'm going to replace the pivot ball and fork.