Skip to main content ↑ ↓
Topic: Looking for a throttle body and matching egr spacer (Read 419 times) previous topic - next topic

Looking for a throttle body and matching egr spacer

I'm looking for 65 or 70 mm throttle body and matching egr spacer (65mm is prefered). If you have something let me know. I'm not looking to spend a bunch of money so used is fine as long as it still functions correctly. Thanks.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Looking for a throttle body and matching egr spacer

Reply #1 –
I HOPE to have another 65mm t-body by the end of the week that I was going to convert to our cars (it's from an explorer).I was going to smooth and polish the inside and roll the incoming edge of it like I did on the one I'm using now.If you want it (when I get it),I'll make you a deal and include the throttle lingage for it so you can do it and save a few bucks if I have to do it.I took my factory t-body spacer to a machine shop and had it opened up to 65mm for $15.00.Cheaper than buying one.Just a thought.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for a throttle body and matching egr spacer

Reply #2 –
Sounds like a plan. I might have something pending so I'll let you know for sure later in the week. Thanks :D
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Looking for a throttle body and matching egr spacer

Reply #3 –
No worries.If I get it,I'll let you know first.If you already have one,I'm following my original plan of modding it then selling it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for a throttle body and matching egr spacer

Reply #4 –
Don't worry about it Vinnie. I found a 65mm tb and egr spacer locally for $50. Picked it up and I'm good to go. Thanks anyways:D
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.
 

Looking for a throttle body and matching egr spacer

Reply #5 –
10-4.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..