Skip to main content
Topic: We need a new rule..... (Read 2565 times) previous topic - next topic

We need a new rule.....

Reply #30
Let's just make vinnie the board King and then let nature take its course. If he refuses I'll gladly accept the position instead. Clearly, CLEARLY I have equal credentials and am well-suited to the job. I mean really! :hick:
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

We need a new rule.....

Reply #31
Quote from: V8Demon;239535
While that may be true, how many people who post on a regular basis (or irregular for that matter) have joined since the switch and never saw the Sleezyboard forum?

Also, FWIW, I was on the old board and I do not remember that.  I do remember it being suggested here (never set in stone) and thought it was a good idea.
[/SIZE]


it must have preceeded this thread,, based on the content of the thread.
http://www.foxtbirdcougarforums.com/showthread.php?t=182

We need a new rule.....

Reply #32
Quote from: ZondaC12;239536
Let's just make vinnie the board King and then let nature take its course. If he refuses I'll gladly accept the position instead. Clearly, CLEARLY I have equal credentials and am well-suited to the job. I mean really! :hick:


I don't want that job,you can have it.I was actually just making a suggestion to begin with in this thread,and seriously didn't expect anyone to post on this thread.I didn't think it would even be taken very seriously.It's really not that big of a deal.As I said,just a suggestion.The "punishment" part was a joke.I merely would like to hear the end of the story when,more often than not,a lot of people devote time and effort into a project,or helping someone out,and never here the results.Pics are nice,but not necessary.Just a few words to let everyone know the conclusion,and a few details on what fixed the problem,or where the "whatever" project status is at.Really,it's simple,not a big deal.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

We need a new rule.....

Reply #33
If I had my way, I'd ban you all just for suggesting the board should change from it's currently perfect ways.

We need a new rule.....

Reply #34
Ouch.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..


We need a new rule.....

Reply #36
Mine aren't bunched up.They're in the washer right now.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

We need a new rule.....

Reply #37
Quote from: vinnietbird;239556
Ouch.


Oops. I forgot this part.

;)

We need a new rule.....

Reply #38
I got a plan, we modify Vinnie’s rule suggestion to “if any uses sees such a thread, and is interested is such info they are required to add to said thread a message questioning “Hey, “insert username here” whatever became of this?

Seriously, I took your “suggestion” as a joke from the start Vinnie. I do find threads I wish I could have seen the outcome of, and I’m sure I have left a few out there without giving the outcome… reasons vary from too lazy, to busy, rear ended  a jeep, forgot about the thread, haven’t actually finished yet….etc.etc.
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

We need a new rule.....

Reply #39
We Must Have Order!

We need a new rule.....

Reply #40
Quote from: oldraven;239555
If I had my way, I'd ban you all just for suggesting the board should change from it's currently perfect ways.


actually,, it could not have been said better.  I think this board is very detailed and as near to perfect , if not the best on the net.


I could easily compare to other boards but we keep the threads focused and try to pin point problems.

So,, i agree,,
we have no issues really, just a curiosity of the outcome.

 

We need a new rule.....

Reply #41
This is a great place,and I agree with Cassity's post above.Just curious about the outcome of the teasers left behind.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..