Skip to main content
Topic: Taillight clips (Read 519 times) previous topic - next topic

Taillight clips

A couple of the metal clips on the driver's side taillight on my '87 T-Bird are broken and the taillight has a hard time staying put. Anyone have a couple they can sell?
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Taillight clips

Reply #1
Need a pic of the part?




SCT Tuned by Me(Greg@SpeedyDyno.com)

E.T. 10.28 @ 136.5 MPH 1/4 mile: List of Mods; 351 EFI, AFR heads,AOD,Rousch 13in frt brakes,11in rear brakes, AirRide Tech air ride system, Sub frame connetors,2400 RPM stall, 3.50,BBK shorties,T62PT Turbos  air to air intercooled, Home built kit.
Car weights 3705lbs without driver:burnout:

Taillight clips

Reply #2
Maybe for 83-86 clips. I would expect all 87-88 clips to be the same (part of them wraps around the plastic of the bulb enclosure and a small forked tongue in the center grabs the lens enclosure, and it's the tongue that breaks off)
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Taillight clips

Reply #3
SO you want the tail light bulb pigtail. Head on over to the parts store. You can get new ones there. I sell them all the time. Just make sure you take yours to compare. I know at work we sell them in Borg Warner and Calterm brands. You could also check the BWD site to see if they can give you the number. Here is the link http://www.bwdautomotive.com/ Maybe you can find what you are looking for.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Taillight clips

Reply #4
I'm just talking about the little metal clips that hold the lens on...
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Taillight clips

Reply #5
OK, I still tell you the parts store they should be able to get them in Dorman or Disco brand. Maybe even the Dorman/Help stuff.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Taillight clips

Reply #6
I'm looking for three or four clips like these:
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D

Taillight clips

Reply #7
did you find them yet?
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Taillight clips

Reply #8
quietleaf, PM me your address.

i rescued my broken tails from the trash before the trashman came this morning. managed to salvage 9 of these clips for you.
gumby - beauty may fade, but stupid is forever!


 

Taillight clips

Reply #10
I already PM'ed gumby with my address so hopefully I'll be okay now, but thanks for the offer. I've snapped quite a few of them over the years.
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D