Skip to main content
Topic: where the F%@# do i get these rivets? (Read 1476 times) previous topic - next topic

where the F%@# do i get these rivets?

the ones that hold the window regulator on. ive tried harbor freight, nothern tool, lowes, home depot, auto zone, oreilly's, car quest, walmart, and ace hardware... :beatyoass:

i can try to get a pic of a chiseled one, if that would help???
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


where the F%@# do i get these rivets?

Reply #1
Are you talking about rivets?Won't small bolts work with locknuts?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

where the F%@# do i get these rivets?

Reply #2
Thats what I did.  Works just as good and makes it way easier if there is a problem that needs to be fixed.

where the F%@# do i get these rivets?

Reply #3
i guess what i be doin' then!
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


where the F%@# do i get these rivets?

Reply #4
Make sure you use lock nuts.They're cheap and it's worth it so you won't have to get in there and re-tighten nuts and bolts evry so often.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

where the F%@# do i get these rivets?

Reply #5
you could always add some locktite too. Just for good measure. Oh and about those rivets those aren't like the ones you buy. They are a facotry deal where a machine stamps them into place and forms those niffty little heads on them. At least that is what I've been told. I bet you should be able to get some big headed one you just might have to order them. I'll look at work.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

where the F%@# do i get these rivets?

Reply #6
1/4" diameter rivets should do it. ipsd is right - you'll never get factory-style ones.
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

where the F%@# do i get these rivets?

Reply #7
if you nuts and bolts dont over tighten them.

where the F%@# do i get these rivets?

Reply #8
i actually found some at the paint supply. and get this.... they're called "window regulator rivets". go figure!
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


where the F%@# do i get these rivets?

Reply #9
So was that a auto paint store? ALso that is awsome to here that you found those fatcory style rivetts. Thanks for the info. Keep up the good work.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

 

where the F%@# do i get these rivets?

Reply #10
yea, auto paint
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast