302 Swap So-Far (w/ pics)

Topic: 302 Swap So-Far (w/ pics) (Read 1793 times) previous topic - next topic

302 Swap So-Far (w/ pics)

March 01, 2007, 12:07:34 AM

ok so as alot of you know i bought a 302 rollerblock for my fox and this is what i have so far

The Block right after i got bored out .30 over

Edelbrock Torker II Intake Manifold

Edelbrock 600CFM

things that are not pictured are the: Ported E7 Cylinder Heads and Hyperteutic Pistons and Ford Racing Rods. I have and E303 Cam that i am about to order. lmk how im doin yall so far i have spent not that much money on this project. probably in the ballpark of 350.00

302 Swap So-Far (w/ pics)

Reply #1 – March 06, 2007, 12:59:19 PM

Looks good. When are you going to start assemblying every thing? Don't let the bores rust in that engine block.

302 Swap So-Far (w/ pics)

Reply #2 – March 10, 2007, 08:57:37 AM

thanks 88bluebird, i want to have it in by may but if not in may then b4 november so i can take it down to the daytona rod run... and i spray the block down every week with WD-40 to keep it from rusting

302 Swap So-Far (w/ pics)

Reply #3 – March 20, 2007, 09:48:11 PM

WOOOOO!!!!! All the low end parts are coming this weekend from summit!!!

302 Swap So-Far (w/ pics)

Reply #4 – March 20, 2007, 10:33:56 PM

Keep us posted.It feels good to get parts.better than Christmas.