Skip to main content ↑ ↓
Topic: aftermarket guage install (Read 1390 times) previous topic - next topic

aftermarket guage install

got a chance to work on my guage panels today. came out nice, i think. :pbb:
radio delete, moved the cubby down below the heater controls, and ditched the system sentry.

heres a py cell phone pic from before i cut the holes


after holes




and with the guages i have so far "installed"



the holes need a lil sandin so the guages will slide all the way in, but you get the idea.
top two(2 5/8) will be fuel pressure, and water temp
next three(2 1/16) are oil pressure, boost/vac, and a/f ratio
lower panel will be a diff temp guage, and a switch for the diff cooler pump/fan after i get them. plus whatever other guages/switched i decide to install later on.
gumby - beauty may fade, but stupid is forever!

aftermarket guage install

Reply #1 –
I HAVE to have my music.Nice job,though.Clean looking.Keep us posted and keep the pics coming.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

aftermarket guage install

Reply #2 –
a hybrid turbo, bailey BOV, and 3" exhaust sing all the songs i need to hear :screwy:

thanks!
gumby - beauty may fade, but stupid is forever!

aftermarket guage install

Reply #3 –
I agree with both :D Love the gauges but just gotta have the tunes and A/C :D


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

aftermarket guage install

Reply #4 –
i woulda kept the A/C but the previous owner already gutted it. i dont care enough about it to go thru all the work to reinstall it.

i still have heat. with the center vents blocked more air will travel to the other vents.
gumby - beauty may fade, but stupid is forever!

aftermarket guage install

Reply #5 –
i was thinking of similar, but a plate bent to the shape of the face of the speedometer with guages in it. if anyone has done this or similar, post pics.
:cougarsmily:5.0 HO, E303 cam, Exploder/Cobra intake, smog pump delete, Ford Taurus electric fan, MAF conversion, BBK headers, MAC 2.5" off-road exhaust w/x-pipe, AOD w/shift kit, 8.8 Trac-Loc rear w/disc brakes, 5-lug conversion w/'98 Mustang GT 17" wheels, Mach 1 springs:cougarsmily:
 

aftermarket guage install

Reply #6 –
Quote from: jncocowboyx;123494
i was thinking of similar, but a plate bent to the shape of the face of the speedometer with guages in it. if anyone has done this or similar, post pics.


this is what i got