Skip to main content
Topic: car wont start... need help (Read 1004 times) previous topic - next topic

car wont start... need help

as you all know I changed my car from anit-lock to power brakes.  now I'm done I need to move the car but it wont start.  there is no hum from the fuel pump, the pump is only a few months old Walbro.  the car drove itself to where its sitting.  is there anything under the hood that has something to do with the fuel pump that I might not of hooked up?

car wont start... need help

Reply #1
refer to that thread i wrote up for crystal or my link in the greatest hits near misses section.  theres a step by step there that WILL get you up and running for sure.

the eec relay might not be hooked up, behind the pass strut tower.,,or its not getting power.

try 2x4 or a rubber hammer on the tank.  It might need some encouragement to wake up.

car wont start... need help

Reply #2
inertia switch?

 

car wont start... need help

Reply #3
I ended up calling Claude last night and he pointed me in the direction of the grey and black plugs on the drivers side at the firewall.  come to find out the black plug wasnt plugged in resulting in my problem.  Thanks for the help.