prothane motor mounts

Topic: prothane motor mounts (Read 3098 times) previous topic - next topic

prothane motor mounts

October 28, 2006, 06:37:56 PM

Any thoughts, opinions, alternatives? Looking for something to absorb lots of torque.

prothane motor mounts

Reply #1 – October 28, 2006, 07:07:35 PM

What year???
Have you checked with chuck???
I have his mounts as do many others on here and i must say,top notch!

prothane motor mounts

Reply #2 – October 28, 2006, 07:22:56 PM

Looks like you have an 87-88TC?

Like dominator asked, what year, but also what engine.

I'd be surprised if you found anything from Prothane that would work...

prothane motor mounts

Reply #3 – October 28, 2006, 08:16:09 PM

88 tbird w/302, but looking to drop a 400/351C in, should be same motor mounts?

prothane motor mounts

Reply #4 – October 28, 2006, 10:06:30 PM

The 86-88 T-Bird/Cougar use unique mounts - Mustang mounts will not work. Because of limited demand new mounts are unavailable for 86-88 models (except Chuck's very excellent units). If you wish to use Mustang mounts you'll need a Mustang K-member and lower control arms

prothane motor mounts

Reply #5 – October 28, 2006, 10:36:09 PM

thanks, that's all I needed to know. I'd be interested in Chuck's mounts "just-in-case". I was reading Mustang forums and they all mentioned using 302 mounts to bolt 351C's in. I had reason to believe the Tbird, would be different. Thanks again.

edit: just looked at the prothane site, they list mustangs only.

so, with Chuck's mounts, how are they different? still bolt up to a 351C or 400? Or would I have to provide a plate?

prothane motor mounts

Reply #6 – October 29, 2006, 03:32:42 PM

If 302 mounts work for the 351C, then theoretically mine could work, but I don't know for certain. My mounts fit the 302/351W in the 86-88 Tbirds/Cougars and include everything from the engine to the K-member.

If you had an 83-85 Tbird you could use "Mustang" mounts.

There are pics of my 86-88 mounts HERE

prothane motor mounts

Reply #7 – October 29, 2006, 04:11:30 PM

nice pics...what are the other mounts for, 2.3? And how much?

prothane motor mounts

Reply #8 – October 29, 2006, 05:38:57 PM

My other applications are covered HERE

The mounts are running $135-140 at this time.

prothane motor mounts

Reply #9 – October 29, 2006, 06:59:51 PM

302 mounts will work on a 351C. they will not work on a 400. M series motors use a unique motor mount.

i stuck a 400 in an 86 capri once.....

prothane motor mounts

Reply #10 – October 29, 2006, 07:18:10 PM

400 in a Capri?, headers, or manifolds? I've been reading about the 400's having header fitment issues. Anyhow, I'd be interested in the mounts, but I won't get to it til after winter...just in my planning stage. Thanks, Chuck, I'll be in contact after Christmas, if that's ok.

Gumby, what mounts did you use?

prothane motor mounts

Reply #11 – October 29, 2006, 07:31:50 PM

custom solid mounts
the car never made it a completed stage. hadnt worked out an exhaust plan yet, but i did test fit the stock manifolds in there. was very tight, but they did go on with some massaging.
the tunnel was on the small side for the big block bell pattern C6 as well.

prothane motor mounts

Reply #12 – October 31, 2006, 01:45:38 AM

i thought 351C had different mounts than 351W and 302... but i must be thinkin wrong.

prothane motor mounts

Reply #13 – October 31, 2006, 05:41:48 PM

if you want a ready to go 400FMX (351/400m size with SB bellhousing pattern) engine that has 351M internals and is .060. Everything in it is from a reman job but new. Can get pics. Yes I am trying to puppies it off on someone, Tired of having it sitting around.

Methos