Hardened Aux staft with stock gear September 01, 2006, 02:04:10 PM Hey guys, I want to get my '88TC goin this weekend and it needs a dizzy. It has a hardened aux shaft and the dizzy on there has a brass gear. Would a stock gear work?Nick Quote Selected
Hardened Aux staft with stock gear Reply #1 – September 01, 2006, 02:32:01 PM Not sure what you're actually asking.... Quote Selected
Hardened Aux staft with stock gear Reply #2 – September 01, 2006, 04:37:19 PM Can I stick a stock distributor in an engine with a hardened intermediate shaft and have no problems? The current distributor has a bronze gear, the one I want to put in does not (it's an OEM unit).Nick Quote Selected
Hardened Aux staft with stock gear Reply #3 – September 01, 2006, 04:39:26 PM http://www.esslingeracing.com/catalog/page03.pdfIt's one of these. Quote Selected
Hardened Aux staft with stock gear Reply #4 – September 02, 2006, 12:06:46 AM The hardened shaft gear will eat the stock cast iron unit. It will also eat the bronze gear, but it will last 25-30K mi. You may get 6-8K mi out of the cast gear... All assumes a reasonable oil pressure(no more than about 60 psi), higher pressures will speed the wear... Quote Selected
Topic: Hardened Aux staft with stock gear (Read 820 times)
previous topic - next topic
