Weatherstrip..anyone have part numbers?

Topic: Weatherstrip..anyone have part numbers? (Read 4762 times) previous topic - next topic

Re: Weatherstrip..anyone have part numbers?

Reply #15 – November 18, 2004, 01:32:35 PM

For the moonroof weatherstrip: http://www.sunroofdoctor.com

That's a pretty standard part, unlike the stuff Chuck wants to make. Best of luck.

Re: Weatherstrip..anyone have part numbers?

Reply #16 – November 18, 2004, 02:44:13 PM

I've been looking everywhere for these moldings, all obsolete. I checked with Steel Rubber Products(classics), they don't make anything for that new of a car. I found some replacement molds in J.C.Whitney for the Fox Mustangs which LOOKED the same, but went to the boneyard and is 1/8 narrow. I talked to Mustang Restorer here in town, he said buy something close and glue it in. That's probably what I'll end up doing. BigC/'86 T-bird

Re: Weatherstrip..anyone have part numbers?

Reply #17 – February 26, 2005, 10:54:36 AM

The OEM part #'s for the beltline weatherstrip for 1983/84 Cougars for the windows are E3SZ 6321456A and E3SZ 6321457A for driver and passenger sides. I have not been able to locate any but I did find a kit to replace these at http://www.classiquecars.com for 1983/84 Thunderbirds for $130 a side

Re: Weatherstrip..anyone have part numbers?

Reply #18 – February 26, 2005, 03:51:32 PM

I've love to get the gaskets for the 87-88 Tbird - all of 'em. Windows, doors...

Anyone have these part numbers?

Thanks!
Chris

Weatherstrip..anyone have part numbers?

Reply #19 – February 02, 2006, 08:26:40 PM

Quote from: Black Cat

The OEM part #'s for the beltline weatherstrip for 1983/84 Cougars for the windows are E3SZ 6321456A and E3SZ 6321457A for driver and passenger sides. I have not been able to locate any but I did find a kit to replace these at http://www.classiquecars.com for 1983/84 Thunderbirds for $130 a side

Anyone know if all the weatherstripping listed at this site will cover the whole car?

Weatherstrip..anyone have part numbers?

Reply #20 – February 02, 2006, 08:47:35 PM

Well, my father order some mustang weathstrip for the windows when he wrecked my car. We found that it was a little too long, but also not wide enough. So, by splitting the weatherstripping in the middle, I made it work. It's not exactly perfect, but it's definitly much better than broken stuff everywhere. The one thing I would love to find is the strip on the inside of the door along the tip of the A-pillar. I need an umbrella inside when it's raining because of the failure of that piece of junk. I will get pics if needed. Also, for the door stripping I contacted JC Whitney, and they can sell the mustang stuff by the roll. So I bought it along with the trunk stuff for the mustang. Just cut to length and slide it on. Works pefect. I havent been able to find anything for the piece along the bottom of the door though.

Weatherstrip..anyone have part numbers?

Reply #21 – February 02, 2006, 09:54:00 PM

check out this topic
http://natomessageboard.com/ultimatebb.php?ubb=get_topic;f=1;t=015779

Weatherstrip..anyone have part numbers?

Reply #22 – February 02, 2006, 11:39:37 PM

Thanks for the link, fordguy. Just sent the company they're in-touch with (info@fairchildind.com) an email. I'd suggest the rest of you do the same :)

Weatherstrip..anyone have part numbers?

Reply #23 – February 03, 2006, 12:27:19 AM

I would think if this is possible it would be awesome as these pieces are needed greatly. I'm gonna make another thread if allowed so I can maybe get more responses to this issue.

Weatherstrip..anyone have part numbers?

Reply #24 – May 10, 2006, 12:45:50 AM

Hey Guys,Im in the same boat also,I have a 85 T-Bird,And Im in the serious search too,if I find somthing I will tell ya;-)

Weatherstrip..anyone have part numbers?

Reply #25 – May 10, 2006, 08:01:50 AM

They have gotten emails and replied to the lot of us saying that it's not worth it to them to do the tooling......as of right now we're screwed. Unless someone wants to front the coin for them to do 500-1000 sets.......