Alternator drive February 22, 2006, 09:22:30 PM This may belong in Electrical, but here goes. I wish to drive the water pump with a Moroso Drive Kit, but ran into the problem of the alternator belt hitting the w/p pulley. This is on a '89 5.0L H.O. motor I'm putting in my T-Bird. I would like to know if a different alt bracket would allow a belt from just the crank pulley to the alt. This is a race only configuration I'm talking about. Is it possible that an early bracket would work? Anyone know of a bracket to do this? I have an A/C Eliminator Kit installed now, but would like to free up some HP by using the electric kit. Thanks, Fred Quote Selected
Alternator drive Reply #1 – February 22, 2006, 10:16:22 PM you can use the older V belt brackets Quote Selected
Alternator drive Reply #2 – February 22, 2006, 10:58:05 PM march or mach...not sure wich one has all kinds of brackets... Quote Selected
Alternator drive Reply #3 – February 23, 2006, 06:46:07 PM Thanks guys, I'll look into that. Fred Quote Selected
Topic: Alternator drive (Read 751 times)
previous topic - next topic
