Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? April 01, 2017, 05:10:25 PM Well since the Thunderbird is going to the body shop I figure I might as well have the door hinge pins changed. Late Model Restoration sells a kit for 87-93 Mustangs: https://lmr.com/item/LRS-23204-KIT/83-93-Mustang-Master-Door-Hinge-Pin-Bushing-KitThis kit should work fine on my car correct? Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #1 – April 01, 2017, 10:11:46 PM That's what I'm using in mine. The pins have enough length when held to my hinges. Should work fine. I just need to figure out what I can do to replace my rotted out door checks. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #2 – April 02, 2017, 08:28:30 PM Thanks. I bought them. The pins will be going with the car to the body shop. I'll just have the driver side changed, as it's a little wiggly. The passenger side is still tight. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #3 – April 06, 2017, 04:06:12 PM Found this on the check:http://www.foxtbirdcougarforums.com/showthread.php?38226-How-do-you-replace-a-lower-driver-s-quot-Door-Hinge-Check-quot-on-a-78-83-FordWhen you say check are you referring to the cylinder that has the pin through it?http://www.rockauto.com/en/catalog/ford,1983,thunderbird,5.0l+302cid+v8,1140107,body,door+hinge+roller,10713Or the metal tab? IF its the metal tab the last part number I have for that is E3SZ-63235A62-A. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #4 – April 06, 2017, 04:22:48 PM This piece: Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #5 – April 06, 2017, 04:28:57 PM Green Sales has those door checks...http://www.rearcounter.com/E3SZ-63235A62-A-parts89438.htmlYou'll have to call for pricing. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #6 – April 06, 2017, 05:36:55 PM I just replaced those on my driver's side a few months ago. See below, before and after, exact same issue. Bought mine on eBay: http://www.ebay.com/itm/NOS-1983-1988-FORD-THUNDERBIRD-LOWER-DOOR-HINGE-CHECK-ASBY-E3SZ-6323504-A-NEW-/142275924746?hash=item21204e530a:g:ABUAAOSwiDFYPM6K&vxp=mtrThe part number is different than what Aerocoupe and Eric have called out above. Had to buy two of them as the one on my car was two pieces stacked on top of each other. A single one does not "push" back with quite enough force. I have also seen these on Cougars/Tbirds in the salvage yard where there is a rubber bushing mounted on these facing the frame ... not sure if that causes a difference in the part numbers. I did not have these on mine. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #7 – April 07, 2017, 09:22:39 AM Figured I would post up that part number in case the E-Bay link ever went away. E3SZ-6323504-A. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #8 – April 07, 2017, 12:31:05 PM I've heard that our pins were the same as the F-150 ones from the same era. Can anyone confirm?? Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #9 – April 07, 2017, 02:38:14 PM Well in a few weeks I'll find out if the LMR Mustang hinge pins work, at least on my car :hick:. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #10 – April 07, 2017, 02:44:42 PM Back when my car was being repainted (early 2001), the driver's door was sagging so the body guy bought one of those Help! hinge pin kits for it. IIRC there were two different sizes, we just picked the size that was closest and it was dead on. Been using it ever since with no issues. At that time, most door hinges used one of those two pin kits so it was no problem figuring out which one it was. Doesn't surprise me if a truck pin kit works on a car, or vice versa. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #11 – April 07, 2017, 03:41:12 PM All I can tell you is that the hinges on my Fox Mustang suuuuuck compared to the Birds hinges. I replaced all the hinges on my Bird in '98 when the car was repainted and they are still like new. I have put three sets of pins and bushings in the Mustang since 2000 and just put the fourth set in last month. You cannot replace the door side of the Mustang hinges as that is welded to the door which is a BS deal but I guess is cut down on assembly time. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #12 – January 07, 2019, 05:04:32 PM I came across this thread recently because I'm rebuilding a door hinge. The metal spring that holds the door check was broken like others - it turns out that both part numbers Aerocoupe provided are correct. You need one of each (E3SZ-6323504-A and E3SZ-63235A62-A), one is the spring, the other is a reinforcement. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #13 – January 07, 2019, 05:19:48 PM This help kits are junk, at least the last one I bought. I bought 4 to take car of a saggy hinge and an extra set for my other car.I don't know what those bushing are made of, but I broke all but one of then with my fingers. I ended up buying a pipe and drilling it out to the correct size that I picked up at tractor supply. Quote Selected
Fox Mustang door hinge pins=Fox Thunderbird door hinge pins? Reply #14 – January 11, 2019, 12:22:28 PM As a FYI the LMR hinge pins worked fine on my car. Quote Selected