Spindles
Reply #1 –
You might wanna change out your ball joints. Cuz the sn95 spindles have a different taper. So put sn95 ball joints in your fox control arms. Good.
Next, if youre concerned about bumpsteer, you'll want 95-96 spindles. Where the tie rod connects, it's raised a little compared to the 97+ spindles. But if this is a drag car, you might not care about bumpsteer.
Last, where the strut bolts to the spindle, on the fox spindles, that's 1in thick. On sn95 spindles it's 3/4in. So you may or may not need shims.
Kyle