Mach 1 Chin spoiler?

Topic: Mach 1 Chin spoiler? (Read 1415 times) previous topic - next topic

Mach 1 Chin spoiler?

March 23, 2016, 06:02:59 PM

Hey guys, I was looking at getting a Mach 1 chin spoiler for the TC front bumper on my Tbird. I was wondering if there are any installation issues to look out for, if there's a specific spoiler I should purchase or any other concern I may not be thinking of.

This is what I'm looking at
http://www.americanmuscle.com/mach1-chin-spoiler-9904.html

Mach 1 Chin spoiler?

Reply #1 – March 23, 2016, 06:47:27 PM

I got the same thing on Ebay a bit cheaper. Let it sit in the hot sun for a while, then jack the front of the car off, pull the wheels off, and have a drill and fasteners. I had to drill holes around the perimeter of the lower part of the bumper cover and spoiler and bolted it all together. Once it's on, trim the ends off with a Dremmel and cutoff wheel. There will be about 5 or 6 inches on each side that needs to be removed.

Mach 1 Chin spoiler?

Reply #2 – March 24, 2016, 09:06:15 AM

You can get them either straightened out or rolled up. Spend the extra 10 bux and get the straightened out one. The rolled up ones take a long.time to smooth out. They're actually much easier to install on a TC front end as opposed to a non TC one.