caster/camber plates July 27, 2005, 10:43:51 PM i am attempting to make my own caster/camber plates.can someone tell me the manufacturer and part # of the bearings that the strut shaft goes through?any help would be appreciated. Quote Selected
Re: caster/camber plates Reply #1 – July 27, 2005, 11:25:35 PM It would be best to use a 1/2" spherical bearing (Auroura, etc) and make an adapter to step the strut shaft to the right size for the bearing. Quote Selected
Re: caster/camber plates Reply #2 – July 28, 2005, 03:20:11 PM thanks ChuckW,ya came through as usual. Quote Selected
Re: caster/camber plates Reply #3 – July 28, 2005, 03:30:41 PM No prob. Think of kind of a top-hat shaped adaper that would install from the bottom.The little ridge on the adaper would rest on the ridge of the strut and stop on the bottom of the bearing ball.Did some like that for my buddies Mustang and for another's Supra. Quote Selected
Topic: caster/camber plates (Read 1354 times)
previous topic - next topic
