Skip to main content ↑ ↓
Topic: Che lcas (Read 404 times) previous topic - next topic

Che lcas

New Che double adjustable control arms paid 339.00 will sell for 200.00 plus the shipping from 72801
Thanks,
Steve


SOLD SOLD SOLD

Che lcas

Reply #1 –
Are the bushings the weld in type?
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

Che lcas

Reply #2 –
Not sure what your asking? These are bolt in, the bushings are glued to the rod end to help with the install.
Steve

Che lcas

Reply #3 –
The little silver bushings/spacers on each side of the rod end that the bolt goes thru. I was wondering if those are weld on. It keeps the holes on the trq box from egging out.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,
 

Che lcas

Reply #4 –
Money on the way.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,