Skip to main content ↑ ↓
Topic: Minitub (Read 5196 times) previous topic - next topic

Minitub

Reply #30 –
I have 275/60/15 Hoosier Drag radials on both of our cars





SCT Tuned by Me(Greg@SpeedyDyno.com)

E.T. 10.28 @ 136.5 MPH 1/4 mile: List of Mods; 351 EFI, AFR heads,AOD,Rousch 13in frt brakes,11in rear brakes, AirRide Tech air ride system, Sub frame connetors,2400 RPM stall, 3.50,BBK shorties,T62PT Turbos  air to air intercooled, Home built kit.
Car weights 3705lbs without driver:burnout:
 

Minitub

Reply #31 –
my blue bird has a slight minitub in her.. i mainly just cut the top half of the well out and mated a 16ga. trailer fender to it and covered the inner side, mating it to the existing lower half of the factory wheel well.. i have 15x8's with a 27x10.50 tire that fits nicely up in there with the 2-1/2" drop.. i'll see if i have any pictures of it in my old phone
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver