Skip to main content ↑ ↓
Topic: Before and after with mach1's (Read 2163 times) previous topic - next topic

Before and after with mach1's

First pic is the mach's and the 2nd is the mooge 8600's. Not much different,even the ride wasn't noticeably different.  XX
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Before and after with mach1's

Reply #1 –
Looks good...I have a set of those Moog springs new in the box in case I ever go away from my steeda's.

Nice looking Cougar as always.
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

Before and after with mach1's

Reply #2 –
Saving the first pic for my background! Nice. Got to get me them CHE adjustables. Mine sits really low in the rear with the Machs.
home ported E7's, HO intake, 93 Tbird cam, 65mm tb, Shorties, dynomax lers, TC 3.73 rear, Mach 1 springs, Bauman shiftkit, epoxy mod, SD, 3G alt, black magic fan

Before and after with mach1's

Reply #3 –
Great looking Cat as always. I can't see much of a difference either. Eit5her way,between the two, it's sitting nicely.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Before and after with mach1's

Reply #4 –
looks very good

i got my CHE on friday!!!!!!!
upper and lower adj  very nice pieces

Before and after with mach1's

Reply #5 –
Looks great!
Matt
1984 Thunderbird - 89 302 HO, GT40 heads w/ Trick Flow springs, E303 cam, Edelbrock Performer 289 intake and 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax lers, Mustang AOD and shifter, Mustang 8.8 w/ 3.73s, 3G alternator, Mustang front and rear sway bars, KYB 87-88 Turbo Coupe shocks and struts, and 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter w/ Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax lers, 3G alternator, aluminum radiator, and 3.27 gears.
 
1986 Cougar 5.0, 1989 Mark VII LSC 5 speed, 1980 Mercury Zephyr 4 door (sold)

Before and after with mach1's

Reply #6 –
Man that car looks awesome without the side mouldings.....
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Before and after with mach1's

Reply #7 –
With the rear tires I have I can't lower mine really they fill out the wheel well, I would love to lower the front an inch or two.

Looks nice!
"Real cars dont power the front wheels, they lift them"
[SIGPIC][/SIGPIC]
1984 Mercury Cougar GS 5.0:cougarsmily: BBK Equal Length Shorties, BBK O/R X-Pipe, Magnaflow Magnapacks, Mustang GT Stainless Tailpipes, 18" Magnaflow Rolled Edge Tips. Turbo Coupe Hood, Mach 1 Chin Spoiler. 17"x9" Cobra R's, Falken Ziex 255/50s, and 245/45s.
1984 Ford Thunderbird 3.8L "Drag Queen"
2009 Dodge Ram 1500 Lone Star Edition 5.7L Hemi 400hp, lex DOD14M Magnaflow retro-fit ler kit
 

Before and after with mach1's

Reply #8 –
A little update, I hit in the top of the fender well on the left side on big dips, and it has a 1/2" spacer in it. I haven't measured it but it looks like it dropped a little since I put them in.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +