Skip to main content ↑ ↓
Topic: I have an odd water/oil question.... (Read 1325 times) previous topic - next topic

I have an odd water/oil question....

When swapping an intake, I was just wondering ...about how much water, generally, dumps into the block from the intake? I always change my oil when I do an intake swap, but never really paid any attention to the amount of water lost.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I have an odd water/oil question....

Reply #1 –
Mine is typically not a huge amount, maybe a  half pint or less.
Mike

I have an odd water/oil question....

Reply #2 –
i was just curious.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I have an odd water/oil question....

Reply #3 –
As good measure, I always take a wet vac to the lifter galley and water passages to get as much coolant as possible so as not to have any moisture present when resealing the new intake......just me.
84 COUGAR/90 HO, 1.7RRs, performer RPM,700DP, equal length shorties, stainless EXH ,T-5,Hurst pro-billet, KC clutch, 8.8/ 4.10s, line-lok, bla ,bla, bla.
71 COMET/289,351w heads, 12.5 TRWs, 750DP, Liberty TL, 9"/6.00s, 11.9x @112 , bla,bla,bla.

Never shoot your mouth off, unless your brain is loaded! ....I may get older, but I'll never grow up!....If you're not laughing, you're not living!  :laughing:

I have an odd water/oil question....

Reply #4 –
I always clean up the valley very well also. It didn't appear that much water at all got in the oil, but as I stated, I didn't look real close. Usually (like when I blew a head gasket a few years ago),if there's a significant amount of water in the oil, you can't help but notice.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I have an odd water/oil question....

Reply #5 –
I've been looking around, and I think in a couple of weeks I'm going to order an aluminum 3 row radiator. Couldn't hurt.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I have an odd water/oil question....

Reply #6 –
Why dont you drain the block first before removing the MANIFOLD, Then no coolant gets in the OIL????
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

I have an odd water/oil question....

Reply #7 –
There's almost always a little water that gets in the oil from the intake. No big deal.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

I have an odd water/oil question....

Reply #8 –
Ok Thats fine with me. But if you drain the block their is NONE. I always drain the block to prevent coolant entering the oil. Coolant in the oil is NOT GOOD. But a few drops or so is not an issue
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!
 

I have an odd water/oil question....

Reply #9 –
I agree. I always change the oil anyway when i swap intakes. Just a habit. I keep things clean and highly functional.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..