ignition re-wire...and maybe a cb radio
so, first off, my buddy had an 85 camaro iroc with a special ignition switch. turns out it was installed by the previous owner who didnt want his precious project stolen, and it worked to great success. Now, i dont understand much of this, but from what i guess is the actual ignition module in the steering column is like a 4 point switch. point 1 is the accessory, point 2 is the dead, point 3 is everything on, and point 4 is joined with a spring that only engages the starter while the circuit is closed.
after this long winded explanation, im wondering, could it be possible to identify the wire(s) leading off of that 4th point, and just re-route them to a dedicated switch in another location. kind of like my own home made security system, that way, you still need the key to start the car, but that final push on the ignition does nothing, you have to know where the real button is.
:burnout:
PT. 2 as almost a side note, i did some looking around on kijiji, and it turns out people around here are selling cb radios for like $50 a piece. I thought it would be cool to have in my sable...3 years ago...i figure it might be a little more era appropriate in the cougar, considering it is 10 years older than my ol' sable. let me know what you think/what you guys have maybe done/or if you think im a little cracked for falling back to such an old technology:mullet:. (also if i do install one, im getting one of the coil antenna's, i would hate to have to run a gargantuan whipple out of the middle of my trunk)
Thanks all!