Skip to main content
Topic: Heater hose ? (Read 4040 times) previous topic - next topic

Heater hose ?

Reply #15
Not tryin to hi-jack the meaning of this thread, but sockets can ve very useful for our cars, you can use a grinded down 1/2" socket to replace the hardened plastic ball bearing things in the window motors when they eventually (it will happen) break.
FOXLESS!!

1994 Lincoln Mark VIII


Heater hose ?

Reply #16
I think this should be a sticky.

When I replaced my hoses, I never even knew there was one of these in there. Which probably had something to do with my core failing a few months later.

Now I'm going to have to stick something in there for when I use the core in the winter months. (summer just means bypass and no restrictor)
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

Heater hose ?

Reply #17
I have had no faith in a restrictor doing anything in the past. I have also only had one heater core out of probably 6 last longer then 1 year. Last year it only lasted about 5 months while I was doing pizza delivery.

This year, I put a 1/4" drive socket in there, and we will see how it works out. I also managed to get a lifetime warrenty one from orileys after autozone would not let me use their warrenty. I also paid less, and got an older copper looking core. All the ones I have gotten for the last several years were aluminim.

I am actually considering boycotting autozone for what happend that day. They said that my lifetime warrenty expires after 1 year, and that is also wouldn't matter because they didn't have one to replace it. Then they found one in the back that was not in the computer system. Ended up being the wrong part, and when I told them that, they didn't belive me. I am not sure what the heater core was for, but the tubes were on opposite ends, and would not fit, even if it was the right part. They recommended I go to a store about 15 miles away to see if they had one that I thought would fit.

I ended up going about 5 miles down the street and got one at checker(oriley's). Its pretty funny, but I quit going to checker for the same reasons why I am thinking about quitting autozone.
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Heater hose ?

Reply #18
If you really think you need it in your system, Just put a tie strap a big one around your hose,near the inlet of your core, Tighten it down, to restrict it some.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Heater hose ?

Reply #19
Quote from: Haystack;344365
I have had no faith in a restrictor doing anything in the past. I have also only had one heater core out of probably 6 last longer then 1 year. Last year it only lasted about 5 months while I was doing pizza delivery.

This year, I put a 1/4" drive socket in there, and we will see how it works out. I also managed to get a lifetime warrenty one from orileys after autozone would not let me use their warrenty. I also paid less, and got an older copper looking core. All the ones I have gotten for the last several years were aluminim.

I am actually considering boycotting autozone for what happend that day. They said that my lifetime warrenty expires after 1 year, and that is also wouldn't matter because they didn't have one to replace it. Then they found one in the back that was not in the computer system. Ended up being the wrong part, and when I told them that, they didn't belive me. I am not sure what the heater core was for, but the tubes were on opposite ends, and would not fit, even if it was the right part. They recommended I go to a store about 15 miles away to see if they had one that I thought would fit.

I ended up going about 5 miles down the street and got one at checker(oriley's). Its pretty funny, but I quit going to checker for the same reasons why I am thinking about quitting autozone.

you can't always blame them man. All the stores all train their employees the same way, too read whats on that  computer. My personal favorite at least in my area is AZ b/c I've been going there enough that I know everyone there and most of the guys there have a good fair amount of knowledge about what goes where, and their always willing to help me look up part #'s and prices and what not.

Not to mention they always seem to have the parts I need.

I do prefer pep boys a little more but the closest one is 25 mins away so I stick to AZ who is literally almost across the street, but they still got Advance , NAPA, and carquest beat.
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

Heater hose ?

Reply #20
Old thread I know, but my heater core finally died completely on easter 105 miles from home.  Isn't that usually when  happens?  It's by-passed for now, gonna be awhile since I don't usually get days off unless it rains.  Also thought I might wait till I can get a blower motor and do both at the same time.  This is the first heater core I'm going to replace.  My last ford(a topaz) had over 300,000 miles on it and was still the original heater core!

P.S. The AZ's around here usually have know-it-all rice lovers, who really don't know much about anything other than honda's.  The carquest always tries to sell me more then I actually want/need(came in for spade terminals and he tried selling me new relays?).  Napa is over priced.  I go to Oreilly's for the price and knowledge, sometimes AZ beats the price tho by a few bucks.

Heater hose ?

Reply #21
If anyone needs the article the MM&FF did on replacing the heater core let me know.  I have a copy and can email it to you.

Darren

83 351W TKO'd T-Bird on the bottle


93 331 Mustang Coupe - 368 rwhp

Heater hose ?

Reply #22
I swapped mine in about an hour. Nothing to it. I got mine from Autozone and have never had an issue with it in three and a half years.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

 

Heater hose ?

Reply #23
Quote from: vinnietbird;358765
I swapped mine in about an hour. Nothing to it. I got mine from Autozone and have never had an issue with it in three and a half years.

Same here, even on the first try. Read the write up here....... the pictures really make it easy

http://www.coolcats.net/tech/troubleshooting/heatercore.html

Good luck!
FOXLESS!!

1994 Lincoln Mark VIII