Skip to main content
Topic: 11 inch front brakes-underway (Read 4669 times) previous topic - next topic

11 inch front brakes-underway

Reply #15
You might as well whip it out and soak the brake lines with your own piss, probably do a better job than the wd 40..  put some blaster on there! 
 
 
regarding the brake lines... if you heat them up you will have to flush the entire system..  but you should do that anyway...
 
I use a line wrench with a pair of vise grips clamped down on them to prevent the wrench from spreading.
One 88

11 inch front brakes-underway

Reply #16
Mine were seized also. I used PB Blaster and vise grips. do not use a wrench. You'll strip the nuts for sure. Vise grips are your friend here ;)
[SIGPIC][/SIGPIC]
86 5.0 Turbocoupe (Katrina), 87 5.0 Sport (Rita)

11 inch front brakes-underway

Reply #17
actually combine the two tools..  place the line wrench on the fitting then clamp the vise grips on the line wrench jaws.  This little tip will allow you to remove any fitting..... well most of them!
One 88

11 inch front brakes-underway

Reply #18
Quote from: ThunderbirdSport302;90633
well, one snag right off....the fittings are frozen to the lines...i've been soaking the hell out of 'em with WD-40 (all ive got here right now)

if worse comes to worse, and they won't budge, i'll have to cut the lines, and re-flare them, although I'm not good at that...
Would it be safe to use some heat from a propane torch on it?...very carefully of course, i know how flammable brake fluid is!! :hick:

other than that, and the lack of brake pads till day after tomorrow, it's all but done...thanks guys...:D

 
Bring'er back...... What fitting did you wind up needing for the hard to soft lines?????
Mike

11 inch front brakes-underway

Reply #19
I can't remember right off...but if you want, I have a pair of nearly new front hoses for a the 11" brakes I'd sell...with the fittings needed...

Not much use for 'em with the SN95 setup I'm now using lol
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6


11 inch front brakes-underway

Reply #21
Quote from: ThunderbirdSport302;359273
I can't remember right off...but if you want, I have a pair of nearly new front hoses for a the 11" brakes I'd sell...with the fittings needed...

Not much use for 'em with the SN95 setup I'm now using lol


Lets do that.  PM me and we can set up a price or meeting point.
 
Quote from: Aerocoupe;359356
Just to loop these two threads together so the information is found easily:

http://www.foxtbirdcougarforums.com/showthread.php?31295-Finally-getting-something-done

Darren

 
Sorry I posted that up last night before you guys helped me out. :punchballs:
Mike

11 inch front brakes-underway

Reply #22
Thunderbirdsport302, I still want those hoses.
Mike

11 inch front brakes-underway

Reply #23
ok...I just now saw you'd PM'd..I'll dig 'em out tomorrow and get some pics for ya :)
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6

11 inch front brakes-underway

Reply #24
Awesome, thank you.
Mike

11 inch front brakes-underway

Reply #25
Quote from: ThunderbirdSport302;359535
ok...I just now saw you'd PM'd..I'll dig 'em out tomorrow and get some pics for ya :)

 
Did you find them yet?
Mike

11 inch front brakes-underway

Reply #26
If he can't find the hoses, I have a set, plus one new one.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

11 inch front brakes-underway

Reply #27
Looks like Vinnie's in...I took mine off a few weeks ago, put them in a small box and *thought* I'd taken them out to my storage bin...but now they're AWOL.
Sorry that I dicked around your time...

Irony is....2 days after you get the ones from Vinnie, I'll find them. Ughh.
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6

 

11 inch front brakes-underway

Reply #28
Quote from: ThunderbirdSport302;359804
Looks like Vinnie's in...I took mine off a few weeks ago, put them in a small box and *thought* I'd taken them out to my storage bin...but now they're AWOL.
Sorry that I dicked around your time...

Irony is....2 days after you get the ones from Vinnie, I'll find them. Ughh.

 

Ive been getting dicked around by UPS on my struts.  They wont arrive till Mon.  I will wait if your lines are fairly new and have the fittings.  As long as you want to look for them. :bowdown:  What price are you thinking?;)
Mike