Skip to main content
Topic: Snowblower performance question (Read 1340 times) previous topic - next topic

Snowblower performance question

I picked up an old snowblower at a storage sale for $5 that didn't run. I took the carburetor apart and found all kinds of gunk and larvae in there! The primer port was so plugged up I had to run a small drill bit in there to break up the clog.

Anyway, long story short, it runs now.

Let me start my line of questions by saying that I have never owned or even used a snowblower. So I am not quite sure if this thing just sucks, or I am just not using it correctly. When I start down a path, it seems to only throw the snow about 3' away. That's fine for a sidewalk, but when I go to do my driveway, it tosses the snow in a heap that ends up being too tall for the next pass (this is a smaller unit, maybe 20" wide, with a 9" diameter blade).

Can I do anything to get it to throw the snow higher? When I see the neighbors using theirs, it shoots like 6 or 7 ft in the air. Mine barely breaks 3ft.

Like I said, I know nothing about them. Do any of you fine gents know what the deal may be? It's a Gilson ST-320 from the 70s. Here are some pics (not my pics, but a unit just the same- http://www.mascus.com/Agriculture/Used-Other-road-and-snow-machines/gilson+st+320/gilson/images/58B7F170-EC66-48AF-B75C-5DF80E7B5CB9.html)
CoogarXR : 1985 Cougar XR-7

Snowblower performance question

Reply #1
I just found a youtube video of the same snowblower http://www.youtube.com/watch?v=nRe_PjbIMSM

Hmm... mine runs just like that. Is that normal? Look how many passes he had to make... I mean, it's easier than shoveling, but I imagined less passes...
CoogarXR : 1985 Cougar XR-7

Snowblower performance question

Reply #2
Thats only a single stage blower. Better blowers have a second stage to throw the snow farther

Snowblower performance question

Reply #3
That's about it. you do know it's a 2 stroke ,right? You may improve on it some by cranking up the rpm's some. Not sure how fast yours is running now though.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Snowblower performance question

Reply #4
Yeah, I know it's a 2-stroke, that much the guy at the sale told me. The one/two stage stuff I didn't know though...

I ran it on the sidewalk and it worked pretty good. I want to try it when the snow is not so deep. We got 12" last night and drifts up to double that... So that's another reason it's not working so well, heh, the snow is taller than the top of it's chute!
CoogarXR : 1985 Cougar XR-7

Snowblower performance question

Reply #5
Their good for 4'' to 6" my buddy has one bigger than yours and big storms he goes out a couple of inches a time. There nice little machines till the banks get to high they sure beat a shovel any day.
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

Snowblower performance question

Reply #6
For the $5 I have in it, I am happy with it :)
CoogarXR : 1985 Cougar XR-7

Snowblower performance question

Reply #7
Yeah, a single stage sucks. I had one on a 16HP tractor and it couldn't throw the snow farther than I could throw the tractor. Two-stage snowblowers have a slow spinning auger that pulls the snow into a very fast spinning impeller that can chuck it well over 20 feet, even when it's over a foot deep.
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

 

Snowblower performance question

Reply #8
i dont wanna give you any ideas but remove the input shot from a small mulch machine, make the opening bigger then make a horizontal input scoop, then flip the push handle the opposite side. 

or get a snow plow blade for your riding mower like i did

or,, every couple inches, hop on your riding mower and lower the deck and cut grass,, or snow,,lol.