Skip to main content
Topic: 88 T-Bird roller feeler- NOW WITH PICS * (Read 1153 times) previous topic - next topic

88 T-Bird roller feeler- NOW WITH PICS *

Reply #15
Quote from: thundr306;338300
Did the engine bay get done also?


Nope, taped off. Was going to pull the engine and do it this winter.
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

88 T-Bird roller feeler- NOW WITH PICS *

Reply #16
Beautiful.  Wish it was in Canada.
1986 Thunderbird:  5.0L (157,000km) /AOD/ 7.5  Accel Cap/Rotor/8mm wires.
Wanted:
-10 Hole rims or turbines
-Stock K-member or cheap aftermarket
-Cheap  8.8 posi  Rear. 

R.I.P 
'84 Cougar  3.8L 4BBL / AOD/ 8.8 posi  "Runns"
'93 Mustang 2.3L /T-5/ 7.5
'85 Cougar 3.8L /AOD/7.5  "Jolly Green"
'87 Mustang 2.3L / T-5/ 7.5
:burnout:

 

88 T-Bird roller feeler- NOW WITH PICS *

Reply #17
Quote from: Charlie_chaos;338307
Beautiful.  Wish it was in Canada.


Not that far, come get it !!!
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's