Skip to main content ↑ ↓
Topic: looking for 28oz.damper and flywheel. (Read 632 times) previous topic - next topic

looking for 28oz.damper and flywheel.

For a 69 302. If anybody got something they want to unload.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

looking for 28oz.damper and flywheel.

Reply #1 –
manual or auto flywheel? what tooth count?
1985 TC (yet another one) Fully loaded
has 225k mile  still with the factory head gasket






84  Turbo ranger  Daily driver  ($800.00 Ebay deal)
          volvo FMIC and more getto rigging than the law should allow

looking for 28oz.damper and flywheel.

Reply #2 –
Quote from: BogusSVO;326866
manual or auto flywheel? what tooth count?

It would be for a auto,not sure of the tooth count,I would guess whatever a 68 289 has with a c-4 it's still in the car.I can probably use that one,but then I have to find one for the 289 to put in the cat,but that's not this year.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

looking for 28oz.damper and flywheel.

Reply #3 –
I Need you to measure from the top starter bolt hole to the next closest bell housing bolt hole.

it should be 1 1/8 or 1 1/2 inch, that will tell me which one you need

I can get both new, $59 each plus shipping
1985 TC (yet another one) Fully loaded
has 225k mile  still with the factory head gasket






84  Turbo ranger  Daily driver  ($800.00 Ebay deal)
          volvo FMIC and more getto rigging than the law should allow
 

looking for 28oz.damper and flywheel.

Reply #4 –
Quote from: BogusSVO;327464
I Need you to measure from the top starter bolt hole to the next closest bell housing bolt hole.

it should be 1 1/8 or 1 1/2 inch, that will tell me which one you need

I can get both new, $59 each plus shipping

I'll check that,Probably this weekend.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +